Square straight fiberglass general purpose pole for up to 30-foot mounting heights.
Shaft: Reinforced composite shaft incorporating "E" type fiberglass and pigmented, UV-inhibiting, thermosetting polyester resin. Shaft is formed by the pultrusion process with fiberglass strands traversing the length of the pole.
Anchor base: Heavy-duty metal base plate is permanently bonded to the outside of the fiberglass shaft.
Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.
Hand hole: Standard 2-1/2" x 5" hand hole opening with non-metallic oval-shaped covers secured with vandal-resistant stainless steel 1/4" socket-head screws.
Hardware: Fasteners are high-strength galvanized or zinc-plated or stainless steel.
Top cap: Removable top cap provided with drill-mount poles.
Base cover: Includes full-base cover finished to match pole.
Finish: Must specify finish.
Check out POLESCENTRAL for additional resources and solutions.