ROAM® | Remote Operations and Asset Management | Acuity Brands

AYI (NYSE)
$146.32

Search In...

Proven Leader in Wireless Control Solutions

The ROAM^® system is a wireless outdoor lighting management system that helps minimize maintenance costs, optimize energy use and provide an improved nighttime environment.

ROAM Concierge allows municipal, multi-site and large institutional customers to monitor and control each fixture on their system, all without expensive IT infrastructure. With the ROAMview™ system, single-site customers have a simple but powerful plug-and-play system for controlling and monitoring their lighting fixtures.

Benefits

Monitor individual fixture performance
Improve repair, service and replacement efficiency
Remotely control fixtures on-demand or by schedule
Ensure lights are operating properly to help enhance public safety

The ROAM System

The ROAM system works through a large mesh network of intelligent photocontrols that monitor outdoor lighting and communicates information needed to control their performance – easily, individually and precisely.

Smart Photocontrols (Nodes)

Reports on the operational performance of the fixtures

Executes on, off and dim commands

Operates on any outdoor LED, HID or other fixtures

Allows spacing up to 1,000 feet apart

Delivers up to 0.5% energy measurement accuracy

Gateway

Receives data and transmits commands to nodes

Communicates with up to 2,000 devices

Uplinks via cellular or Ethernet communication

Mounts on pole or building

Network Operations
Center

Receives and stores all data from gateways

Processes data to support portal diagnostics

Operates without requiring customer-hosted hardware, software or IT support

Customer Portal

Provides a map-based interface for location of fixtures

Displays operating conditions, performance data and energy use

Allows a user to control and schedule ON/OFF/DIM commands for individual fixtures or groups

Manages lighting at one or multiple sites

Learn More

The ROAMview™ System

Smart Photocontrols (Nodes)

Reports on the operational performance of the fixtures

Executes on, off and dim commands

Operates on any outdoor LED, HID or other fixtures

Allows spacing up to 1,000 feet apart

Delivers up to 0.5% energy measurement accuracy

Gateway

Receives data and transmits commands to nodes

Communicates with up to 2,000 devices

Uplinks via Ethernet communication

Mounts on pole or building

Server

Receives and stores all data from gateways

Comes pre-configured with ROAMview software

Portal

Provides a static map interface for a view of the site and fixtures

Displays operating conditions, performance data and energy use

Allows a user to control and schedule ON/OFF/DIM commands for individual fixtures or groups

Learn More

REN127-347-480 DV Wireless fixture dimming and monitoring now available in one control.

Wireless-enabled Communication
Remote On/Off/Dim Control
Zero Cross Relay Switching
Optional On-Board GPS

REN127 NM1 This node is used with the ROAM wireless outdoor lighting management system. It mounts directly to the light fixture and allows you to monitor the fixture's voltage and current. It also receives commands from the gateway to control the fixture.
ROAM DIAGNOSTICS OVERVIEW

Fixture malfunction (lamp, ballast or starter failure)
Cycling
Daybumer
No report (communication, power or equipment failure)
Unspecified malfunction
Power (power, KWH, voltage or power quality alerts)

WIRELESS ENABLED COMMUNICATION

2.4GHz -IEEE 802.15.4 compatible
FCC part 15 approved
Range - 1,000 foot clear line of sight

WIRELESS CONTROL

Remote on/off control
Grouped scheduling (energy savings)

PHOTOCONTROL

70¿1,000 watt fixtures; Voltage 100¿305VAC 60Hz
320J MOV - 6500 amp surge protection
Average Power consumption 1.6 watts
Maximum Power consumption: 2.2 watts
Complies with FCC part 15
-40 to +85°C ambient; up to 90° interface per ANSI; Base rated at 120°C
Brass legs, black polypropylene cover, neoprene gasket
Black acrylic window for tunnel operation
Complies with ANSI C136.10

REN480 NM1 This node is used with the ROAM wireless outdoor lighting management system. It mounts directly to the light fixture and allows you to monitor the fixture's voltage and current. It also receives commands from the gateway to control the fixture.
ROAM DIAGNOSTICS OVERVIEW

Fixture malfunction (lamp, ballast or starter failure)
Cycling
Daybumer
No report (communication, power or equipment failure)
Unspecified malfunction
Power (power, KWH, voltage or power quality alerts)

ROAM NODE FEATURES

WIRELESS ENABLED COMMUNICATION

2.4GHz -IEEE 802.15.4 compatible
FCC part 15 approved
Range - 1,000 foot clear line of sight

WIRELESS CONTROL

Remote on/off control
Grouped scheduling (energy savings)

PHOTOCONTROL

70~191;1,000 watt fixtures; Voltage 408~191;528VAC 60Hz
320J MOV - 9500 amp surge protection
Average Power consumption 2.5 watts
Maximum Power consumption: 4 watts
Complies with FCC part 15
-40 to +85~176;C ambient; up to 90~176; interface per ANSI; Base rated at 120~176;C
Brass legs, yellow polypropylene cover, neoprene gasket
Black acrylic window for tunnel operation
Complies with ANSI C136.10 f

REN127 CM1A The decorative utility ROAM node has all the features of the standard ROAM node, but is designed to accommodate Utility Style Decorative Fixtures
PHOTOCONTROL

40¿400 watt fixtures; Voltage 100¿305 VAC 60Hz
320J MOV - 9500 amp surge protection
Average Power consumption 1.94 watts
Complies with ANSI C136.10 and FCC part 15
-40 to +70°C ambient operating temperature
ANSI - standard 2.5-5 second turn off/on delay
Acrylic window, brass legs, black polycarbonate cover, neoprene gasket
Filtered silicon light sensor
Optical indicator to alert line crew of problem or malfunction
US/Canadian UL Recognized component: File #E331898

WIRELESS ENABLED COMMUNICATION

2.4GHz - IEEE 802.15.4 compatible
FCC part 15 approved
Range - 1,000 foot clear line of sight

WIRELESS CONTROL

Remote on/off control
Grouped scheduling (energy savings)

REG127 Each ROAM wireless outdoor lighting management system gateway receives data and transmits commands to ROAM nodes, with each one communicating with up to 2,000 devices.
ROAM gateways are mounted on poles or attached to buildings, and uplink via Ethernet communication, or, in the case of ROAM, also by cellular link.
• Uplink via cellular or Ethernet communication • Communicate with up to 2,000 nodes • Transmit/receive fixture data to/from nodes and forwards to network • Powered through standard locking type receptacle on fixture

ROAMVIEW A self hosted portal for a small system and/or single site customers, pre-configured with ROAMview software.

PRODUCT OVERVIEW

Interactive map of installation area
Daily reports of each fixture
Grouping of devices
Schedule and even control commands
Windows 10 Professional

DUR Series The DUR Series retrofit receptacle kit adapts a light fixture for use with a NEMA locking type photocontrol. Available in 3, 5 and 7-pin options.
Design Details: