Switching Photocell

The RP PC IN Daylighting Controller can be used to control any type of lighting: incandescent, fluorescent, compact fluorescent (CFL) and HID. The sensors work in peripheral offices, skylit areas, cafeterias, warehouses and any other indoor areas with natural light access.

An LPCS Power Control Station will be required to switch the lighting load.

  • Easy-to-read LCD Display prompts installer through set-up and accurately reflects the current control mode and light level
  • Four user-adjustable parameters: ON Setpoint, OFF Setpoint, OFF Setpoint Time Delay, and ~8216;Hold On While Occupied~8217; Mode (if wired with an occupancy sensor)
  • Test Mode overrides the programmed Time Delay to allow installer to check if settings are correct
  • Control load status verification allows testing and confirmation that the wiring is correct by pressing the select button
  • Manual Override for one hour (if wired with a low voltage, push-button wall switch)
  • Meets Section 119~8217;s requirement for day lighting in California~8217;s Title 24 Lighting Code
  • LED status indicator for Override or Test Mode, or if the device has switched the lights on or off
  • Two mounting options for either top-lit or side-lit applications
  • Shape and design developed to prevent misalignments
  • Can be programmed in most daylight conditions


  • Application Type : Education, Government, Healthcare, Hospitality, Manufacturing, Offices and Banks, Religious, Retail, Warehouses
  • Brand Name : Synergy
  • Environment : Indoor
  • Mounting Type : Surface
  • Product Type : Photo Sensor
  • Series : RC