SSS Quick Ship Program: Lithonia Lighting® is now offering a quick program for SSS poles with over 500 different configurations! Check out SSS Quick Ship spec sheet for available options and program rules.>
SSS Poles: Square straight steel general purpose pole for up to 39-foot mounting heights.
Shaft: Weldable grade, hot-rolled, commercial-quality carbon steel tubing with a minimum yield of 55,000 psi (11-gauge) or 50,000 psi (7-gauge). Uniform wall thickness of .125" or .188". Shaft is one piece with a full-length longitudinal high-frequency electric resistance weld. Uniformly square in cross-section with flat sides, small corner radii and excellent torsional qualities. Available shaft widths are 4, 5 and 6 inches.
Anchor base: Fabricated from hot-rolled carbon steel plate conforming to ASTM A36 that meets or exceeds a minimum-yield strength of 36,000 psi. Base plate and shaft are circumferentially welded top and bottom.
Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.
Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others).
Hand hole: Reinforced hand-hole rim having nominal dimensions of 3" x 5" for all shafts. Includes steel cover with attachment screws.
Hardware: All fasteners are high-strength, galvanized or zinc-plated or stainless steel.
Top cap: Removable top cap provided with drill-mount poles.
Base cover: Includes full-base cover finished to match pole.
Finish: Must specify finish.
Check out POLESCENTRAL for additional resources and solutions.
Suggested Replacement Products
Photometry & Revit (BIM)
Request BIM or IES Files
|Color||Almond, Beige, Black, Blue, Bronze, Brown, Gray, Green, Red, Silver, White, Yellow|
|Light Source||Not Applicable|
|Lumen Output||Not Applicable|
|Mounting Type||Anchor Based, Direct Burial|
|Voltage Rating||Not Applicable|