LC&D™ systems offer practical hardware and software solutions ranging from switching and dimming relay panels and fixture modules to versatile floor plan software and building automation interfaces.
Systems are digital and scalable, eliminating the need for complex choices about which “level” of system to use.
The Indoor Digital Photosensor has an extended sensitivity range that allows it to be used in almost any location without needing adjustment for the reflectivity of the environment. Additionally, its dual housing construction allows it to be used as a full-sized sensor or the center section may be separated for a diminutive ceiling footprint. The Indoor Digital Photosensor comes in three styles:
2-Wire Global Photosensor: Photosensors when combined with a photocell card, have up to 14 different trigger points, each controlling a unique relay group in as many as 64 relay panels. Moreover, each dimmer (0-10V or 120V "phase") may be separately controlled to maintain a unique light level.
3-Wire Local Photosensor: Used only with the MicroPanel integrated distributed control panels which have on-board photosensor inputs. One trigger point or "follow-me" dim level is available (within a single MicroPanel) for every relay or dimmer.
3-Wire Local Slimline Photosensor: Same as 3-Wire Local Photosensor but with smaller footprint of (.310" dia.) makes it ideal for mounting directly to luminaires.
Two different interface cards which allow multiple computers to connect to the GR 2400 system. Connection is from any serial/comm port (RS 232), USB port or ethernet network connection.
USB version comes with RS232 to USB adapters.
- Links to GR 2400 LAN and via a gateway to the internet
- Works with Unity~8482; Remote Clock and Unity GX~8482; Vector Advanced Graphical Software
RS232/USB Version works with:
- Unity Lighting Control Software
- Unity Remote Clock
- Unity GX Vector Advanced Graphical Software
LC&D offers two methods of building automation interfaces:
The MetaServer™ digital web server is a gateway that provides Internet or computer access to these devices.
The PPC1 is used for outdoor photosensors (PCELL 2WO) and has a single photosensor input.
The PCC3 is used for indoor photosensors (PCELL 2WI) and has inputs for up to 3 separate photosensors.
Light levels from each photosensor may be displayed or read at the DTC clock
Normally Open electrically held relay which allows a single-pole switch to control loads operating at two diferent voltages (i.e., 120v or 277v).
The Dual Voltage Switch is shipped in a two-gang junction box with a voltage-separating barrier and is shipped with a plaster ring. Its compact size allows a wall switch to be mounted directly onto the GR 2001 box and plaster ring package.
Manage lamp change scheduling for multiple sites
KnightBridge Digital Switch
Key Enabled DigitalSwitch
LC&D Rocker Switch
Indoor Digital Photosensor
PCELL 2WO Outdoor Digital Photosensor
GR2400 Relay Panel
Sub-Branch Circuit Current Limiter
GR2400 Master Controller
Link-To PC Ethernet
Link-To Building Automation
Meta Server with or without modem
Photosensor Input Cards
Dual Voltage Switch
Emergency Shunt Relay
Ready to work together? Request a sales call today!