RSL-200~174; Series is ideal for roadways, area lighting, water treatment facilities, rail yards, port facilities, schools, residential streets and walkways.
Construction: Low copper content die cast aluminum housings provide base corrosion protection. Suitable for side or top entry. External hardware and fasteners shall be stainless steel. The effective projected area (EPA) shall not exceed 1.00 square feet. ~13;~10;
~13;~10;Finish: Electrostatically applied and baked on polyester powder coat paint for superior corrosion resistance.~13;~10;
~13;~10;Optical System: Consists of vandal resistant, non-yellowing prismatic borosilicate glass refractor unaffected by environmental contaminants or ultra-violet radiation. ANSI/IES Type II, III, IV and Type II 4-Way distributions are available. Lamp operation position is vertical to provide a balance of horizontal and vertical illumination.~13;~10;
~13;~10;Electrical System: Holophane manufactured high power factor, copper wound ballast that provides full rated wattage to the lamp. Reliable starting to -40~176; F. Starter for HPS lamps is fully encapsulated. A protected starter is available that senses an inoperative or missing lamp and automatically removes itself from the circuit, preventing damage to the ballast. Lamp support is porcelain enclosed socket with nickel plated lamp grip screw shell. ~13;~10;
~13;~10;Installation: Side entry for 1-1/4~8221; or 2~8221; pipe. Top threaded entry for 1-1/4~8221; tapered pipe thread.~13;~10;
Listings: UL/CUL Listed for wet locations at 40C.