TWH LED

LED Wallpack

The energy savings, long life and easy-to-install design of the TWH LED make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility.

Construction

Die-cast aluminum housing has an impact-resistant, tempered glass lens that is fully gasketed. Modular design allows for ease of maintenance. The LED driver is mounted to the front casting to thermally isolate it from the light engine for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants.

Finish
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes.

Optics

Protective glass lens covers the light engine’s precision-molded proprietary acrylic lenses. Light engines are available in 5000K (65 min. CRI) configurations.

Electrical

Light engine(s) consist of 10 or 30 high-efficacy LEDs mounted to a metal-core circuit board and integral aluminum heat sink to maximize heat dissipation and promote long life (L87/100,000 hrs at 25°C). Class 1 electronic driver has a power factor >90%, THD <20%, and an expected life of 100,000 hours. Easily-serviceable surge protection device meets a minimum Category C Low for 120-277V operation (per ANSI/IEEE C62.41.2).

Installation

Back housing is separated from front housing, eliminating ballast weight and promoting easy handling. Top 3/4” threaded wiring access. Back access through removable 3/4” knockout. Feed-thru wiring can be achieved by using a condulet tee. Mount on any vertical surface. Not recommended in applications where a sprayed stream of water can come in direct contact with glass lens.

Other

Note: Specifications subject to change without notice.

Specifications

  • Application : Outdoor
  • Application Type : Emergency and Safety, Façade, Outdoor Area, Security, Sidewalk, Light Commercial
  • Architectural Style : Traditional
  • Ballast Type : Electronic Ballast, Magnetic ballast
  • Batteries Included : Yes
  • Color : Beige, Black, Blue, Bronze, Brown, Clear, Gray, Green, Orange, Red, Silver, White, Yellow
  • Correlated Color Temperature : 2000 K, 2100 K, 3000 K, 3200 K, 3500 K, 3700 K, 3800 K, 4000 K, 4100 K, 5000 K
  • Environment : Outdoor
  • Finish : Gloss, Textured, Unfinished
  • Frequency : 50HZ, 60HZ
  • Lamp Base : 4-pin: G24q-2, 4-pin: G24q-3, Medium: Screw, Mogul: E39
  • Lamp Included : Optional based on configuration
  • Lens Included : Yes
  • Lens Material : Glass
  • Lens Type : Prismatic
  • Light Source : Compact Fluorescent, HID - Ceramic Metal Halide, HID - High Pressure Sodium, HID - Low Pressure Sodium, HID - Metal Halide, Incandescent, Induction, LED
  • Listings : CSA, NOM, UL
  • Lumen Output : 14,000 LM, 1500 LM, 1900 LM, 2700 LM, 28,000 LM, 45,000 LM, 5500 LM, 6000 LM, 9500 LM
  • Mounting Type : Surface, Wall
  • Power Connection : Hardwired
  • Primary Material : Aluminum, Steel
  • Product Type : Outdoor Area and Site, Guard, Sensors
  • Series : TWH
  • Shape : Rectangular
  • Tap Ballast : TB1, TB2, TB3, TB4, TBV1, TBV2, TBV3, TBV4, TBV6
  • Voltage Rating : 120, 120-277, 208, 220, 230, 240, 277, 347, 480, MVOLT
  • Weather Resistant : Yes