Sensor Switch® Mobile App | Programming in a Flash

AYI (NYSE)
$

Search In...

Sensor Programming in a Flash!

Get off the job faster with the Sensor Switch Mobile App. Set occupancy time delay, trim values, photocontrol options and more using your mobile device.

VLP-Sensor-Programming-code-compliance1a

Simplified programming to aid code compliance

Custom PIN to ensure settings are secure

VLP-Sensor-Programming-default-settings1a

Easy restoration to factory default setting

VLP-Sensor-Programming-repeatable-programming1a

Repeatable programming of sensors in different locations

Two Easy Programming Options

VLP-Programming-Option-Bluetooth-Wireless-Programming-BTP-1a

Bluetooth® Wireless Programming (BTP)
Ideal for up to 100ft. range.

Eliminate the need for a lift or ladder! Program settings on multiple sensors simultaneously with Bluetooth® wireless technology.

VIEW GUIDE

VLP-Programming-Option-Visible-Light-Programming-VLP-1a

Visible Light Programming (VLP)
Use for 6-8ft. range.

Change sensor settings using the camera flash on your mobile device for VLP-enabled products within close range.

VIEW GUIDE

How it Works

Bluetooth®
Bluetooth® Configuration for Large Scale Applications

Bluetooth®
Configure Sensor Settings with Bluetooth® Technology

VLP
Configure Sensor Settings in a Flash

FAQs

1. If I can program multiple sensors at the same time, that seems like a network. What am I missing?

The Sensor Switch mobile app allows the user to select all sensors in Bluetooth^® radio range and que them up to set options. Once you push those options the app will connect to each selected sensor, one at a time, and configure it.
2. Are Bluetooth® programmable sensors via Sensor Switch available as discreet devices?

Today, Bluetooth^® programmable sensors are offered in select industrial high bay products. More will be released in additional platforms in the future but is not currently offered as a discreet device to ensure compatibility.
3. Do I still have the option to use push-button programming on VLP-enabled sensors?

Sensor programming using the Sensor Switch mobile app does not eliminate traditional push-button programming. The mobile app is an alternative option that helps overcome the complexity of push-button programming and reduce time on the job for contractors. All VLP-enabled products are programmable using both the Sensor Switch mobile app or the traditional push-button method.
4. What is the default PIN code?

There is no default PIN code. Upon installation, you will be required to set the PIN code. If your application exceeds 500 fixtures, you can process an RFA requesting a pre-set PIN code.
5. Why do I have to login to the Sensor Switch mobile app?

A login gives you the benefit of being able to save profiles. We want to be able to help you remember things like PIN codes and typical configuration settings that may be associated with particular jobs and application spaces.
6. What is the difference between the Sensor Switch Mobile App versus the Acuity VLP Mobile App?

VIEW FAQ SHEET

Mobile App Enabled Products

PHZL - Phuzion LED High Bay

Significant energy savings you can expect. Reliable light levels you didn’t know were possible.

The Phuzion™ PHZL LED high bay is your single LED replacement for up to 1000W HID delivering consistent light levels well beyond traditional lighting and at higher temperatures than other LED high bays. LED savings and performance are enhanced by integrated controls so you can get back to running your business.

For industrial Facilities, heavy manufacturing, convention centers, sports arenas, and renovation/retrofit.

LED driver cuts energy in half and practically eliminates maintenance
Lumen packages range from 50,000 to 100,000
Superior thermal maintenance for reliable illumination in high ambient temperatures (see spec sheet for TM21 data)
Patented borosilicate glass doesn’t fade or degrade over time
Round design makes for easy one-for-one replacement of existing HIDs
Optional integration with XPoint™ Wireless

PHZ - Phuzion

The Phuzion™ LED luminaire takes high-bay lighting to new levels of lumen output and temperature tolerance. Combining the latest in LED technology with the legendary illuminating dynamics of Holophane's prismatic borosilicate glass, the Phuzion LED high bay delivers unparalleled performance and reliability.

Lumen packages range from 12,000 to 60,000 lumens in a single luminaire
Up to 50% energy savings over traditional light sources
Ambient Range: -40°F (-40°C) to 158°F (70°C)
IP64 Rated
Optional integration with Xpoint Wireless for enhanced energy savings
Available in tandem (PHZT), remote (RPHZ) or crane mount (PHZC)

For Industrial facilities, heavy manufacturing, convention centers, sports arenas, and renovation/retrofit.

For high lumens, see the Phuzion PHZL LED High Bay. For intentional uplighting, see the Phuzion PHS LED High Bay.

PXLW Low Bay Weighing in at a mere 19 pounds, the rugged, Petrolux® PXLW LED round low bay is the optimal cost-efficient, low weight, feature-packed solution for the demanding environments where dust, dirt and moisture are a concern.

The Petrolux® PXLW LED round low bay meets or exceeds the code requirements to be used in some harsh industrial applications including petroleum refineries, ethanol facilities, chemical plants, power plants, textile mills, water treatment and wastewater treatment facilities.

Vantage LED The Vantage LED luminaire exceeds rigorous demands of food-processing plants and related areas, thanks to its strategic sloped shape and ultra-sleek corrosion-resistant finish that repel water and provide nowhere for food, dirt or debris to hide.

IBG High Bay

The I-BEAM^® family of LED high bays from Lithonia Lighting^® is among the most recognized and respected brands in the industry, with a proven track record of value and performance. This legacy continues with the IBG LED.

The versatile I-BEAM^® IBG LED high bay boasts a single base platform design with a wide selection of options, taking IBG from basic applications to complex environments, including unconditioned spaces. The result is the maximum performance you need at the lowest possible cost.

I-BEAM^® IBG LED high bay is available with wired and wireless control options including an integrated Sensor Switch^® Haleon sensor that provides remote programmability via Bluetooth^® technology using the FREE VLP downloadable smartphone app. The Haleon sensor allows customers to customize occupancy detection, dimming, and daylight harvesting at the fixture level from their warehouse floor. Embedding wired or wireless nLight® controls further optimizes LED savings for customers today and scales with your space as it grows.

8,000 to 72,000 lumens
Standard and narrow fixture housing options
High-ambient options up 131°F (55°C)
High-efficiency options greater than 180+ LPW
Narrow, general, wide and focus distributions
Snap-fit IP5X dust-resistant diffuse lens standard
3000K, 3500K, 4000K, 5000K; 80CRI (standard), 90CRI (option)
120-480V, MVOLT, HVOLT
0-10V dimming, XPoint^™ Wireless network controls
Embedded nLight® AIR wireless controls
6kV surge protection, standard
Emergency Drivers produce up to 4000 lumens
Rotatable outer light modules

JCBL With its round form and versatility, the JCBL LED high bay allows you to maintain a traditional look while taking advantage of advancements in controls technology. The JCBL provides you the options you want including housings, reflectors, lenses, IP65 rated optics, 6kV surge protection and more. Further enhance the control of your space, you can detect both occupancy and daylight so fixture light levels respond immediately for energy savings and to support building energy codes. Optional controls include, Bluetooth® Programmable Sensors for simple commissioning or nLight® wired and wireless network controls allowing for the creation of zones, scheduling, time-based controls and more. The JCBL round LED high bay has a lot to offer to meet the needs of any application including retail, warehousing, gymnasiums and manufacturing.

PHZL - Phuzion LED High Bay

LED High Bay

PHZ - Phuzion

High Bays

PXLW Low Bay

Petrolux® PXLW LED Round Low Bay

Vantage LED

High Bays

IBG High Bay

I-BEAM® IBG Configurable LED High Bay

JCBL

LED High Bay

VERTEX The VERTEX series of luminaire-embedded occupancy and ambient light sensors are ideal for standalone or network commercial lighting control applications. The VERTEX's ultra-small footprint enables seamless integration into a luminaire without disrupting aesthetics or requiring additional mounting space.

The versatile VERTEX sensor is optimized to perform at a variety of mounting heights typical of commercial applications. Simplicity is a key feature of the VERTEX sensor where configuration settings can be changed using the Sensor Switch® Mobile App through camera flash programming or Bluetooth® wireless programming.

Features:

Configurable using the Sensor Switch VLP Mobile App using camera flash programming or Bluetooth® wireless programming
Direct digital communication with eldoLED ensures reliable dimming and control
Two lens configurations perform at various heights - high mount 360º
Attachable gasket to accommodate varying placement thicknesses
100% digital passive infrared (PIR) detection provides excellent RF immunity
Auto-dimming via photocell control
High/Low/Off occupancy controlled dimming capability
Integrated low profile and small footprint design
Corrosion-resistant coating applied to all electronics per LT option for added durability
No PIR field calibration or sensitivity adjustments required
Non-volatile settings memory
Convenient test mode quickens initial walk and/or photocell testing
White LED indicator for occupancy detection and programming feedback
Ability to aid in Title 24 compliance
Tested to NEMA WD 7-2011

Haleon Exclusive to the IBG High Bay, HALEON sets the new standard for performance and ease of installation.

The HALEON series of fixture integrated occupancy sensors with dimming photocells are ideal for standalone industrial lighting control applications. The HALEON sensor is designed to be used with eldoLED or similar LED drivers with 0-10 V, 12-24 VDC auxiliary power and stand-by mode. HALEON has the flexibility to change settings with the Sensor Switch® VLP mobile app using flash programing or optional Bluetooth® communication.

The versatile HALEON sensor is optimized to perform at a variety of mounting heights typical of industrial applications. A stowable lens shield can be positioned to mask areas where detection is not needed. HALEON’s small footprint and color options enable seamless integration into the luminaire without disrupting aesthetics or requiring additional mounting space.

HALEON has the flexibility to change settings using your mobile device with the Sensor Switch® VLP mobile app through flash programming or Bluetooth® wireless communication:

VLP flash programming: 6-8 ft. range
Bluetooth® Low Energy (BTLE): 100 ft. range

For more information and resources on the VLP mobile app, please visit the Sensor Switch VLP webpage.

SBG BTP The SBG BTP fixture integrated occupancy sensors with dimming photocells are ideal for indoor stand-alone industrial lighting control applications requiring an IP66 wet location rating. Easy to install and configure, the Sensor Switch® VLP mobile app allows you to change settings using visible light programming or Bluetooth® communication.

The SBG sensor offers reliable performance providing 360-degree passive infrared motion detection combined with an embedded design resulting in a seamless integration into the luminaire without disrupting aesthetics or requiring additional mounting brackets.

It is designed to be used with eldoLED® or similar LED drivers with 0-10 VDC, 12-24 VDC auxiliary power and standby mode. eldoLED drivers deliver smooth and flicker-free deep dimming performance down to 0.1% combined with the ability to upgrade technology, scaling as your business needs evolve.

The versatile SBG sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

Compatible Luminaires:

Phuzion™ PHZ LED High Bay
Petrolux® PXLW LED Round Low Bay
Vantage® LED

For more information and resources on the VLP mobile app, please visit the Sensor Switch VLP webpage.

LSX BTP The LSX BTP fixture mounted occupancy sensor with dimming photocell is ideal for indoor standalone industrial lighting control applications. The versatile LSX sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

The LSX sensor offers reliable performance and an innovative end-mount design with an integrated bracket that installs easily into most fixtures with a standard 1/2” knockout. Easy to install and configure, the Sensor Switch® VLP mobile app allows you to change settings using visible light programming or Bluetooth® communication.

This sensor is designed to be used with eldoLED or similar LED drivers with 0-10 VDC, 12-24 VDC auxiliary power and stand-by mode. eldoLED drivers deliver smooth and flicker-free deep dimming performance down to 0.1% combined with the ability to upgrade technology, scaling as your business needs evolve.

Compatible Luminaires:

JCBL LED High Bay

For more information and resources on the VLP mobile app, please visit the Sensor Switch VLP webpage.

SBO BTP The SBO BTP series of fixture mount occupancy sensors are rated for outdoor use with dimming photocells, making it ideal for indoor standalone industrial lighting control applications requiring an IP66 wet location rating.

With its clean design and reliable performance, the SBO BTP sensor offers 100% digital passive infrared (PIR) technology that’s tuned for walking size motion, helping to achieve code compliance without compromising the aesthetic of the light fixture or the space created. The versatile SBO BTP sensor is optimized to perform at a variety of mounting heights typical of industrial applications.

Easy to install and configure, the VLP mobile app allows you to change settings using visible light programming or Bluetooth® wireless communication.

This sensor is designed to be used with eldoLED or similar LED drivers with 0-10 VDC, 12-24 VDC auxiliary power and stand-by mode. eldoLED drivers deliver smooth and flicker-free deep dimming performance down to 0.1% combined with the ability to upgrade technology, scaling as your business needs evolve.

WSX Series The WSX family of wall switch occupancy sensors provide simple and cost-effective solutions for commercial and residential lighting control applications. With your choice of passive infrared (PIR) or dual technology (PDT) with PIR plus patented Microphonics™ detection, the WSX family provides reliable sensing and dimming performance optimized for your space.

All WSX family sensors have a modern low-profile appearance, soft-click buttons and small motion detection up to 20 feet (6.10 m), making them ideal for private offices, private restrooms, closets, copy rooms or any other small enclosed space.

Easy to install while helping to aid in energy code compliance, the WSX family has a patented wiring method that enables them to function with or without a neutral connection. WSX units come pre-configured for wiring without a neutral; however, if a connection to neutral is required by code, contractors can convert the unit in seconds.

WSX sensors are easy to program using the traditional push-button programming or the optional Sensor Switch VLP mobile app. Watch this video to learn how to configure your wall switch sensors using the VLP mobile app.

WSX D The WSX D wall switch combines 0-10V dimming, passive dual technology occupancy sensing and automatic dimming photocontrols capabilities into a single device. The WSX D is the perfect solution in spaces where multiple energy saving strategies are required.

WSX D sensors are easy to program using traditional push-button programming or the optional Sensor Switch VLP mobile app. Watch this video to learn how to configure your wall switch sensors using the VLP mobile app.
Features:

Compatible with LEDs, electronic and magnetic ballasts, CFLs, and incandescents
100% passive detection, no potential for interference with other building systems
Small motion detection to 20 ft
Push-button programmable without removing cover plate
Adjustable time delays and operating modes
Dual technology (PDT) utilizes PIR and Microphonics™ detection
Self-grounding mounting strap
Device accomodates powering over ground or neutral connection
Ultra low current leakage (<0.5 mA) when connected via ground
Line power and load wires are interchangeable - impossible to wire backwards
Fully meets NEC 2011 Section 404.2C neutral requirements - no current leakage to ground when connected to neutral

CM Series The CM is a low voltage sensor that easily mounts directly to a ceiling tile or a metallic grid. Ceiling mount sensors are offered in a multitude of configurations which address many applications. Lens options include large motion extended range, small motion standard range and bi-directional for hallways. Multiple low voltage sensors can work together to supply the ideal solution for oddly shaped rooms or large open office areas. For rooms with obstructions, these sensors are also offered with Dual Technology, which adds Microphonics™ detection to the Passive Infrared (PIR) detection.
Features:

PIR Occupancy Detection
360° Coverage
Up to 14 Sensors per Power Pack
Time Delay: 30 sec to 20 min
No Minimum Load Requirements
Push-Button Programmable
Green LED Indicator
100 Hr. Lamp Burn-in Timer Mode

CMR Series The CMR is a line voltage sensor that easily mounts directly to a ceiling. Ceiling mount sensors are offered in a multitude of configurations which address many applications. Lens options include large motion extended range, small motion standard range and bi-directional for hallways. These sensors are capable of covering an entire private office or small room by themselves.

A line voltage sensor provides one relay for a single-level control, while the 2-pole version provides a second relay for an additional level of control. For rooms with obstructions, these sensors are also offered with Dual Technology, which adds Microphonics™ detection to the Passive Infrared (PIR) detection.
Features:

PIR occupancy detection
360° coverage
Self-contained relay (no power pack needed)
Time delay: 30 sec to 20 min
No minimum load requirements
Push-button programmable
Green LED indicator
100-hour lamp burn-in timer mode

LSXR Series The LSXR Family of fixture mount occupancy sensors provides reliable and versatile solutions for commercial and industrial lighting control applications. All LSXR Family sensors utilize 100% digital passive infrared (PIR) detection, power from switch line voltage and feature interchangeable lenses, providing flexibility for multiple mounting height and coverage pattern requirements. Available options include dual relays, HVOLT powering and an integrated switching/dimming photocell.
Features:

Four interchangeable lenses: high mount 360º; low mount 360º; high mount aisleway; and small motion 360º
Integrated mounting bracket drops lens down 3” from chase nipple (no bracket accessory required)
100% digital PIR detection - provides excellent RF immunity
No PIR field calibration or sensitivity adjustments required
Single or dual relay versions - designed with robust protection from the harsh switching requirements of T5 fluorescent and LED loads
Powers from single or two-phase line connections
Reversible hot and load wires - eliminates backwards wiring
Photocell and 0-10 VDC dimming options
Digital push-button programming (no tools or analog adjustments required)

VERTEX

Luminaire-Embedded Occupancy and Ambient Light Sensor

Haleon

Fixture Integrated Occupancy Sensor with Dimming Photocell

SBG BTP

Fixture Integrated Industrial High Bay Sensor

LSX BTP

Fixture End Mount Sensor

SBO BTP

Outdoor Fixture Mount Sensor

WSX Series

Wall Switch Sensor

WSX D

Dimming Occupancy Wall Switch

CM Series

Ceiling mount, low voltage sensors

CMR Series

Ceiling Mount, Line Voltage Sensors

LSXR Series

Fixture Mount Sensor

EXPLORE SENSOR SWITCH

Ready to Work Together?

Complete the form below and we will contact you to discuss your current or next project.