Vector~174; is designed for use in offset highway lighting, correctional facilities, perimeter areas, power plants, security areas, rail yards and parking lots.
Construction: Low copper content die cast aluminum housing and door provide base corrosion protection. External hardware and fasteners shall be stainless steel. The door hinges at the top and is held by two hand operated stainless steel latches. The effective projected area (EPA) shall not exceed 2.3 square feet. ~13;~10;
Finish: Electrostatically applied and baked on polyester powder coat paint for superior corrosion resistance. ~13;~10;
Optical System: Consists of vandal resistant, non-yellowing prismatic borosilicate glass refractor unaffected by environmental contaminants or ultra-violet radiation and a formed, anodized aluminum inner reflector. ANSI/IES Type II, III and IV non-cutoff distributions provide wide pole spacing. Socket is field adjustable to produce wide, medium and narrow lighting patterns. ~13;~10;
Electrical System: Holophane manufactured high power factor, copper wound ballast that provides full rated wattage to the lamp. Reliable starting to -40~176; F. Starter for HPS lamps is fully encapsulated. A protected starter is available that senses an inoperative or missing lamp and automatically removes itself from the circuit, preventing damage to the ballast. All electrical control components are mounted on a unitized assembly that features tool-less removal. Electrical quick disconnects are provided. A terminal block is supplied for wiring. Lamp support is porcelain enclosed socket with nickel plated lamp grip screw shell. ~13;~10;
Installation: Vertical and horizontal adjustable knuckle fitter for 2~8221;, 3~8221; or 4~8221; tenon mount. Galvanized steel yoke also available. ~13;~10;
Listings: UL/CUL Listed for wet locations at 40~176;C.