Share
• Facebook
• Twitter
• LinkedIn
• Pinterest

SQMPDC

*Discontinued* MiniPac Remote High Power Dimmer Pack

by Synergy

Use with SQMPCS digital control station to form a small, compact, stand-alone dimming system. Use with SQIDC 8 channel wall box dimmer to control loads on channels 5-8. Use as a remote dimmer pack for a Synergy~174; system (Legacy option on SYSC controller required).

When used with SQMPCS: Forms compact dimming system for offices, conference rooms, etc. Up to three dimmer packs may be used per SQMPCS control station.

When used with SQIDC: An integral switch matrix allows dimmers to be flexibly assigned to SQIDC station channels. Up to four dimmer packs may be used per SQIDC control station.

When used with Synergy~174;: MLX controller with Legacy option required. Up to 64 dimmer packs may be connected to each controller. Dimmers are fully configurable from system controller and may be controlled by any Synergy~174; user interface or schedule.

• High quality architectural-grade filters minimize lamp noise.
• Dimmers are cooled through natural convection flow provided by front cover venting and are available with or without positive air gap on/off relays.
• NEMA 1 enclosure is suitable for surface or flush wall mounting.
• Dimmers are fed from individual 15A or 20A branch circuits.
• All dimmers in a single pack must be fed from the same phase. There is no phase relationship between each dimmer pack, or to SQMPCS, SQIDC or Synergy panels.
• Connects to SQMPCS control station via SYA CABLEA4 control station wire. Connects to Synergy~174; cabinets or SQIDC via SYA CABLES2 network wire.