Round straight steel general purpose pole for up to 30-foot mounting heights.
Shaft: Weldable grade, hot rolled, commercial-quality carbon steel tubing with minimum yield of 42,000 psi. Uniform wall thickness of .120". Shaft is one piece with a full-length, longitudinal, high-frequency electric resistance weld. Uniformly round in cross-section down length of shaft with no taper.
Anchor base: Fabricated from hot-rolled carbon steel plate with 3/4" thickness conforming to ASTM A36. Base plate and shaft are circumferentially welded top and bottom.
Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.
Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others).
Hand hole: Reinforced hand-hole rim located 18" above base. Includes cover with attachment screws.
Hardware: All fasteners are high-strength galvanized or zinc-plated or stainless steel.
Top cap: Removable top cap provided with drill-mount poles.
Base cover: Includes full-base cover finished to match pole.
Finish: Must specify finish.
Check out POLESCENTRAL for additional resources and solutions.