Ideal for a wide variety of low- to medium-height ceiling applications including commercial, retail and hospitality spaces where wallwash reflectors are required.
Recessed frame-in rated Non-IC for new construction or remodel applications. Approved for all ceiling and wiring types. Galvanized steel mounting frame with mechanical trim retention (clips) ensures secure and flush reflector mounting to ceiling. Mounting frame has cutout section for remodel applications when installation from below is necessary. Galvanized bar hangers span up to 24” o.c. and feature built-in T-bar clips and nailers for T-bar or wood joist installation. Frames equipped with galvanized junction box UL Listed for through wire applications.
Maximum 1-1/2" ceiling thickness.
Utilizes an extruded socket housing that attaches to the reflector via key hole mount, which provides superior heat dissipation and extended lamp life. Socket housing also adjusts to accommodate varying lamp lengths.
Electronic ballast with end of life protection standard. Class P thermally protected ballast that protects against improper contact with insulation. Minimum starting temperature is 0°F/-18°C. Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire. Ground wire provided.
Available Reflector Options
8W1, 8W1A, 8W1AZ, 8W1G, 8W1GZ, 8W1PR, 8W1WTZ
Suggested Replacement Products
Photometry & BIM
Request BIM Files
|Correlated Color Temperature||3500 K, Not Applicable|
|Finish||Gloss, Matte, Specular|
|Light Source||Compact Fluorescent|
|Listings||CSA, cUL, UL Wet Location|
|Lumen Output||Not Applicable|
|Voltage Rating||120, 120-277, 277, 347, MVOLT|