The Wireless Receiver works together with the Wireless Switch, the Wireless Occupancy Sensor, the Wireless Door/Window Sensor, the Wireless Handheld Remote and/or the Wireless Photosensor. The GR 2400 Wireless Receiver is powered by the GR 2400 bus (12VDC). The unit itself is wired with Cat. 5 cables and RJ-45 connectors. Each receiver is programmable to allow up to 14 Wireless Switches when no Wireless Photosensors are used, or up to 7 Wireless Switches and up to 3 Wireless Photosensors when photosensors are used. As with any wireless system, care must be taken to ensure that the signal is received from each of the wireless devices. The receiver location may be moved to optimize the system.
• 120 Ohms termination resistance (Uses slide switch to activate the terminator) • RCM 130C EnOcean Receiver Module • Takes 2 consecutive bus addresses • Easy to program • 14 Wireless Rocker Switches (Single) (WRSWT 1BWH) • 7 Wireless Rocker Switches (Double) (WRSWT 2BWH) • 3 Wireless Photosensors (PCELL WRI) • Powered by the GR 2400 System Bus • 315 MHz Frequency • 15cm antenna