Compare

REN127 NM1

Standard 120-277 Volt monitoring control node Discontinued

This product webpage has been discontinued, please see the suggested products below or contact your local sales representative.

This node is used with the ROAM wireless outdoor lighting management system. It mounts directly to the light fixture and allows you to monitor the fixture's voltage and current. It also receives commands from the gateway to control the fixture.

ROAM DIAGNOSTICS OVERVIEW

Fixture malfunction (lamp, ballast or starter failure)
Cycling
Daybumer
No report (communication, power or equipment failure)
Unspecified malfunction
Power (power, KWH, voltage or power quality alerts)

WIRELESS ENABLED COMMUNICATION

2.4GHz -IEEE 802.15.4 compatible
FCC part 15 approved
Range - 1,000 foot clear line of sight

WIRELESS CONTROL

Remote on/off control
Grouped scheduling (energy savings)

PHOTOCONTROL

70¿1,000 watt fixtures; Voltage 100¿305VAC 60Hz
320J MOV - 6500 amp surge protection
Average Power consumption 1.6 watts
Maximum Power consumption: 2.2 watts
Complies with FCC part 15
-40 to +85°C ambient; up to 90° interface per ANSI; Base rated at 120°C
Brass legs, black polypropylene cover, neoprene gasket
Black acrylic window for tunnel operation
Complies with ANSI C136.10

Document Type	Document Title	Description	Updated	View	Download	Email
{{document.DocumentType}}	{{document.DocumentTitle}}	{{document.Description}}	{{document.UpdatedDate \| date: 'MM/dd/yy'}}	View	Download	Email

Photometry & Revit (BIM)
- Request BIM or IES Files
  
  Please be specific with your request and suggest adding a “need by date” if urgent request Note: Your request will be routed to either the BIM or IES team. Thank you.

A+ Capable	Yes
Application Type	Automotive & Parking, Roadways, Bridges & Tunnels
Brand	ROAM
Environment	Outdoor

Regulatory Listing	C-UR, UR
Mounting Type	Fixture Attached
Product Type	Photo Control
Series	REN127