Synergy®

A microprocessor-based digital wallstation which provides a convenient means to add pushbutton controls for on/off, preset, raise/lower, partition control or other user interface to a Synergy~174; lighting control system. An infrared receiver is standard for remote operation and programming of station functions from an accessory SYWR HHP wireless hand held remote programmer.

The SYRSP connects to a Synergy~174; system. All station buttons are fully programmable from the Synergy~174; controller or software and, like all Synergy~174; inputs and outputs, fully accessible to BACnet~8482; building automation systems. This allows system wide daylight harvesting and dimming to be fully integrated into the building control system more simply and economically. Room switching and dimming parameters can be easily incorporated into a time schedule, dimming preset, or progressive load shedding strategy for maximum occupant comfort and energy savings.

The SYRSP EXT is for applications requiring manual and automatic control of fluorescent or HID lighting equipped with compatible 4-wire (0-10V) electronic dimming ballasts, and, for applications requiring manual and automatic control of RT5~8482; or similar fluorescent fixtures equipped with step-dimming ballasts, fluorescent fixtures wired for inboard/outboard switching or two independent lighting zones.

The SYRSP EXT contains fully integrated occupancy sensor and photocell inputs for automated energy management. It may be used as a stand-alone distributed room controller or connected to a Synergy~174; system for timeclock control and integration with a building automation system. For distributed control, the SYRSP EXT provides local on/off, manual dimming and automated daylight dimming control of fluorescent or HID lighting equipped with compatible 4-wire (0-10V) electronic dimming ballasts. It also provides local on/off, manual and automatic control of RT5~8482; or similar fluorescent fixtures equipped with step-dimming ballasts, fluorescent fixtures wired for inboard/outboard switching or two independent lighting zones.

~13;~10;
• Stations are single gang, screwless appearance and are available with 1 to 9 buttons in a variety of painted and metallic finishes. ~13;~10;
• Button caps can be engraved with labels having up to two lines of text. ~13;~10;
• Standard infrared receiver adds capability for operation and programming of station functions from an accessory remote.~13;~10;
• Microprocessor-based wallstation incorporates an advanced, easy to configure daylight harvesting algorithm. ~13;~10;
• When used with Sensor Switch~174; occupancy sensors, all settings either adjust automatically to actual room usage or are set at the station, eliminating costly "ladder time" spent making adjustments to the sensor. ~13;~10;
• Use Sensor Switch power packs to switch up to two full 20A circuits on each zone, eliminating the need for home run wiring back to panel mounted relays. ~13;~10;
• Provides intuitive manual control of bi-level lighting. ~13;~10;
• Button operation may be field configured via the Synergy~174; system controller to satisfy a wide variety of project requirements. ~13;~10;
• Integral LED indicator on each button provides status. ~13;~10;
• Stations connect to a Synergy~174; system controller via the four wire SYA CABLEA4 control station network wire which can be shared by up to 60 SYRS and SQCS stations per system controller.

User defined naming of channel/preset buttons

Customizable screen options (logo, brightness, time-out)

Controls up to 32 channels and 16 presets

Adjustable channel intensity using raise/lower buttons

Preset light levels may be modified and saved from SYGS screen

Programmable fade times

No exposed fasteners

Password protection options

Low power consumption enables up to 60 stations on a single bus

Power failure memory

The SYGS from Synergy Lighting Controls provides economical, intuitive touchscreen control of Synergy systems in one sleek, compact device. Its sophisticated design allows it to be conveniently located and accessible, putting control of multiple lighting channels within reach.

The 3.5~8221; high resolution touchscreen allows the user to easily program customized lighting presets for multiple channels. With a touch of the screen, the SYGS interface activates. From there it is easy to adjust lighting or program the preset buttons that control lighting scenarios for that area.

Navigation from screen to screen within the SYGS is easy with buttons that page forward, return to the main menu, and prompt the user to save preset options when modifications are made. The logo screen display can be customized with user selected graphics.

The ISD Series wallbox dimmers are designed to provide smooth full-range dimming for a variety of loads. Products are available for incandescent, low voltage, electronic low voltage, and fluorescent two-wire and four-wire load types. The ISD dimmers can be used in place of a standard wall switch to provide on/off and dimming lighting control.

• Fluid slide movement allows fine adjustment of light level over the entire dimming range.
• Separate on/off switch permits switching of lighting at a preset level. An integral LED indicator on illuminated dimmers turns on when the switch is off to facilitate switch location in a dark room.
• Can be used with standard three-way or four-way switch for multi-location switching.
• ISD Series dimmers are compatible with Leviton Decora~174; Series wallplates.
• Single location, linear slide dimming with separate push on/off switch for preset three-way and four-way switching.
• Available in standard white and ivory and supplied with a matching single-gang Decora~174; style wallplate. Snap-on Decora~174; style wallplate color change kits available (gray, black, brown, almond, white and ivory).
• Devices can be multi-gang mounted (optional multi-gang DSA wallplate required).

• Master raise and lower buttons adjust intensity of all lights dimmed from station.
• Channel raise and lower buttons adjust intensity level of individual channels.
• LED bar graph displays intensity level.
• Select button to save preset scenes, fade time is adjustable for each scene. Preset button activates presets
• Off function turns off all channels.
• Low-end and high-end dimming limits and dimmer curves are adjustable per channel.
• Requires SQCS 5GB or RACO 699 five gang backbox, 3-1/2" deep.
• Terminals on rear of station allow access from SQRS remote stations or momentary dry contact closures to: six presets, master raise/lower, channel raise/lower, select and off.
• Overall maximum capacity is 2000VA. Maximum capacity per output (1-4) is 800VA incandescent, magnetic low voltage and magnetic ballast, and 600VA electronic two and three-wire fluorescent ballasts.

The SYA DESKTOP provides the ability to program or override all features of Synergy lighting control panels when used in conjunction with the Synergy SYSW CONFIG software. Schedules and programs can be composed off-line and downloaded locally through the RS-232 port on Synergy controllers, remotely via an ethernet LAN, Synergy Arcnet network or through the use of an optional modem.

• Available as desktop, laptop or tablet PC, with the latest processor speed and features.\
• Synergy panel network, Building LAN or BAS network connections are made via Ethernet or Arcnet network (Arcnet connection requires optional SYA NIC PCI)

• Compatible with Synergy, and SwitchPak lighting control systems
• Single-pole/double-throw action
• Standard wall box installation
• Screw terminal connections
• Available in multiple finishes
• Switches may be ganged with other Decora~174; style devices.

LVDS momentary switches provide a durable and attractive low voltage switch solution for lighting override. LVDS switches have a standard strap-mount form factor and designer styling. DSA wallplates are offered in a variety of sizes and finishes. Use with Synergy~174; or SwitchPak~174; lighting control panels.

LVKS switches are a durable and attractive solution for providing a secure means for lighting override. The user must have the included LVKS key to activate the lighting override. Switches are supplied with pigtails connectors for low voltage wiring connections. Use with Synergy~174; or SwitchPak~174; lighting control systems. The LVKS can be used with the LVPS switch in a decorator style multi-gang wallplate.

• Single-pole double-throw action
• Cylinder-style locking mechanism
• Two keys furnished
• Single-pole double-throw action, Cylinder-style locking mechanism, Two keys furnished

The LVPS low voltage override switch provides a durable and attractive solution to override lighting controlled by Synergy lighting control systems. The LVPS is a decorator style switch and uses standard decorator wallplates for single or multi-gang applications.

A pilot light is provided for each button so it can be used as one button for ON (top push button) and one button for OFF (bottom push button). Or, it can control two separate lighting zones with each respective button toggling a zone ON and OFF.

A terminal block is provided for all low voltage connections, eliminating the need for traditional spade type connectors or wire nuts.

Provides individual local line voltage override control of lighting in time-based control schemes. Can be used manually to turn lighting on and off in the normal manner. Resets itself automatically to the off position in response to a programmed power interruption signal provided by the lighting control panel.

~13;~10;
• Works like a standard wall switch for on/off operation. ~13;~10;
• Automatically resets to off when power is removed for approximately five seconds.~13;~10;
• Switch handle is lighted for easy location in the dark.~13;~10;
• Familiar wall switch operation~13;~10;
• No special wiring required~13;~10;
• Uses standard wall plates~13;~10;
• 3 Way option available~13;~10;
• Dual-voltage operation (120/277V)~13;~10;
• UL listed

Installation: Wires to a 120V or 277V circuit switched by a Synergy~174; or SwitchPak~174; relay panel like a standard toggle switch, is not line/load sensitive and does not require a neutral connection.

Strap-mount device; mounts in a standard single gang switch box and uses a standard toggle opening wallplate (not included).

Used for wireless remote control of lighting functions in a Synergy~174; system. Operates in conjunction with the infrared receiver on the SYRSP digital remote wallstation.

• SYWR 6B - Provides remote activation of six presets, master raise/lower and off.

Low voltage analog photosensor used to provide ambient light level information to Distributed Controllers (SYRS EXT, SYRS EXTDS, DEQ LC and DEQ LCDS) for indoor daylight harvesting applications.

• Specialty photosensor is factory calibrated to accommodate the relatively low light levels normally found on the ceiling in office applications.
• 360~176; lens allows the sensor to average the room light level, reducing the effect of reflective or lightly colored items brought into the room or placed on a desk.

Low voltage analog photosensor used to provide ambient light level information to Synergy~8482; panels, Synergy Remote Stations (SYRSP EXT or DEQ LC), SwitchPak or SIMPLY5 Sensor Connector (S5SC) as an analog input. A photosensor is necessary for control of lighting in response to ambient light conditions.

~13;~10;
• Indoor applications~13;~10;
• Color compensated to provide accurate readings~13;~10;
• Easy mounting~13;~10;
• Ideal for Open Loop operation operation in Daylight-Harvesting applications~13;~10;
• Multiple set-points from a single photocell when used with Synergy or SwitchPak panels~13;~10;
• Class-2 wiring~13;~10;
• Switch or dim loads based on light level

A low voltage analog photosensor that provides proportional ambient light level information to a Synergy~174; or SwitchPak~174; lighting control system for use in dimming, switching or daylighting applications.

• Units for outdoor or skylight applications mount to J-box via integral 1/2~8221; nipple.
• Factory-calibrated for the foot-candle levels indicated
• Connect directly to a Synergy~174; or SwitchPak~174; panel's analog input.
• Configuration, setpoints and deadband all are remotely configurable from the Synergy~174; or SwitchPak~174; controller keypad.

The RP PC IN Daylighting Controller can be used to control any type of lighting: incandescent, fluorescent, compact fluorescent (CFL) and HID. The sensors work in peripheral offices, skylit areas, cafeterias, warehouses and any other indoor areas with natural light access.

An LPCS Power Control Station will be required to switch the lighting load.

• Easy-to-read LCD Display prompts installer through set-up and accurately reflects the current control mode and light level
• Four user-adjustable parameters: ON Setpoint, OFF Setpoint, OFF Setpoint Time Delay, and ~8216;Hold On While Occupied~8217; Mode (if wired with an occupancy sensor)
• Test Mode overrides the programmed Time Delay to allow installer to check if settings are correct
• Control load status verification allows testing and confirmation that the wiring is correct by pressing the select button
• Manual Override for one hour (if wired with a low voltage, push-button wall switch)
• Meets Section 119~8217;s requirement for day lighting in California~8217;s Title 24 Lighting Code
• LED status indicator for Override or Test Mode, or if the device has switched the lights on or off
• Two mounting options for either top-lit or side-lit applications
• Shape and design developed to prevent misalignments
• Can be programmed in most daylight conditions

• Synergy~174; system enclosures are shipped from factory stock in three sizes, accommodating either 2, 4 or 6 power modules. The enclosures are fabricated from cold rolled steel, are designed for surface wall mounting and carry a NEMA 1 electrical rating.
• An optional recessed mounting kit permits the enclosure to be flush-mounted in a six-inch thick wall.
• All enclosures are shipped with a factory installed power supply with input terminals provided for either 120, 240 or 277VAC supply voltage. Enclosures intended for use with dimmer modules are supplied with an internal thermostatically controlled cooling fan and a cover with hinged locking door to cover the power module mounted circuit breakers.
• A variety of main lug, neutral bar and main breaker options are available to configure Synergy~174; as a bussed three phase or single phase dimming/switching panel.

A compact and economical lighting control panel that offers simplified solutions for a broad range of lighting control applications. This time-based controller switches lighting on/off at preset times while managing a variety of low voltage inputs. Relays are rated to directly switch 20A lighting loads, eliminating the need for external contactors or relays.

~13;~10;
• Simple Set-Up and Operation ~8211; Programming is quick and easy using the large LCD display with associated soft keys and automatic ReadyHelp~174; on-screen help guide. Unique quick-assign keys provide one-touch program selections and instant override.~13;~10;
• Scheduling ~8211; Individual daily schedules automatically repeat for seven-day lighting load operations. Holiday schedule accommodates 32 dates. Astronomic and automatic Daylight Savings Time operation.Warn-before-off feature flashes lights prior to turning off.~13;~10;
• Overrides ~8211; Eight low voltage switch inputs can be programmed to provide manual control of any combination of relays or override one to eight zones of scheduled lighting. Analog photocell input does not require remote calibrations.~13;~10;
• System Remote ~8211; A single SwitchPak~174; provides a complete lighting control solution and can be used to control operation of additional units. This powerful standard feature expands the capability of SwitchPak~8482; to a system level without adding the complexity often associated with networked systems.~13;~10;
• Building Automation: Adding the BAS option enables native BACnet communication for applications interfacing with building automation systems. SPAK native BACnet provides communication directly to BAS systems without BACnet gateways or converters, using the on board MS/TP terminal blocks.~13;~10;
• Housing ~8211; NEMA 1 enclosure wall-mount with hinged locking cover. Separate line and low voltage compartments.~13;~10;
• Capacity ~8211; Eight single-pole, 20A rated relays for 120/277 dual voltage. Optional configurations available for either 2 or 4, 600V two-pole relays.~13;~10;
• ~13;~10;

  Simple Set-Up and Operation - Programming is quick and easy using the large LCD display with associated soft keys and automatic ReadyHelp~8482; on-screen help guide. Unique quick-assign keys provide one-touch program selections and instant override.

  ~13;~10;

Plenum-mounted DEQ LC load controller provides on/off, dimming and automated daylight dimming control of lighting equipped with compatible four-wire electronic dimming ballasts.

The DEQ LC provides local manual control with fully integrated occupancy sensor and photocell inputs for automated energy management. It may be used as a stand-alone distributed room controller or connected to a Synergy~174; system for timeclock control and integration with a building automation system.

Ideal for applications which require manual or automatic control of RT5 or similar fluorescent fixtures equipped with step-dimming ballasts, fluorescent fixtures wired for inboard/outboard switching or two independent lighting zones.

~13;~10;
• The DEQ LC installs in the plenum above the area being controlled on a plaster ring and standard 4~8221; square junction box.~13;~10;
• Microprocessor-based remote mount distributed controller integrates into Synergy system to provide intuitive control lighting. Compatible with all Synergy occupancy sensors for easy code compliance in a variety of applications.~13;~10;
• Use Synergy power packs to switch up to two full 20A circuits on each DEQ LC, eliminating the need for home run wiring back to panel mounted relays.
~13;~10;
• DEQ LC load controller acts as a hub for the connection of the low voltage DEQ APS photocell, Synergy occupancy sensor, power packs and 0-10V dimmable ballast control leads. If desired, a standard wall switch can be used for local on/off operation making the control system totally unobtrusive to the user.~13;~10;
• When connected to part of a Synergy~174; system, the DEQ LC can share status, set point and override functions with all Synergy~174; system controllers, PC graphics and other building control systems through the BACnet~8482; protocol.~13;~10;
• Classification: Class 2 low voltage device.

PC-based Windows~8482; application used to configure a Synergy~174; system equipped with MLX controllers. Allows on-site or remote programming and configuration of all system parameters and schedules.

• Utilizes a familiar Windows~8482; graphical user interface to provide easy access to all system data. A simple tab-based navigation scheme allows the user to reach most configuration screens with a single click of the mouse. Access privileges for different software features can be set up for multiple users through the use of administrator-defined login IDs and passwords.
• Online mode allows real-time monitoring and override of input and load status as well as diagnostic functions.
• Connection to the system may be made with the supplied RS-232 cable through the front-mounted DB-9 connector on any system controller, directly over the BACnet~8482; network via an Ethernet connection or to the Synergy RS485 Arcnet network (optional SYA NIC PCI network interface card in PC required) A connection may also be made from a remote site using standard telephone lines via the PHONE option on the controller and a PC equipped with a telephone modem.
• Minimum hardware requirements are a 266MHz Pentium~8482; II class PC running Windows~8482; 2000 or later operating system with 128 MB RAM, 30 MB free disk space and 800 x 600 video resolution.

The SYA SKIT is used in a Synergy~174; enclosure in place of the SYSC system controller to provide a blank filler when Synergy panels are linked in a master/secondary configuration.

The SYA SKIT DMX is used in a Synergy~174; enclosure in place of the SYSC system controller to provide for switching and dimming functions in response to a DMX control signal from a theatrical control console or show controller. This configuration provides for DMX only operation of loads. If Synergy programmable features are required, the appropriate SYSC system controller with the DMX option should be used.

• Constructed as a plug-in chassis.
• Accepts one universe of DMX control
• Control up to six Synergy SYPM power modules
• Simple channel addressing
• Controls relays and dimmers
• Includes 6' secondary connection cable

Provides user interface, display, clock and logic circuits for a Synergy~174; lighting control system enclosure and a means to set up lighting control functions, including manual switching, manual and preset dimming, schedules, astronomic time control, photocell switching and daylighting.

SYSC MLS is a stand-alone system controller that can also control a secondary panel.

SYSC MLX is a networked system controller that is a native BACnet controller capable of RS485 or Ethernet communication.

• Constructed as a plug-in chassis to enhance initial installation and serviceability. Used to set up and save operational features of the system. Provides support for external control devices: SQCS Architectural Preset Control Station, SYRS Digital Remote Wall Station, SYRS EXT 0-10VDC Wall Station Distributed Controller, SYRS EXTDS Bi-level Distributed Controller and DEQ LC Distributed Controller.
• User interface is designed for simple operation using the soft key format popular on automated teller machines. Large back-lit display provides text-based prompting and feedback for menu navigation as well as status, diagnostic information and alarms.
• Astronomic feature built into Synergy's internal clock will calculate sunrise and sunset times for use in lighting schedules. The controller also can read values from accessory photocells and provide automatic switching or dimming of lighting based on the ambient light level.

• Modules include eight 30A relays and are rated for 120V to 347V switching applications.
• Provides eight mechanically latching, individually replaceable relays, and offers zero cross switching technology for added reliability when switching high in-rush loads.
• May be ordered with optional 15A or 20A branch circuit breakers.
• 30A, 18000 SCCR @ 277V relay is one of the best in the industry.
• Low voltage terminal blocks are removable for easy installation and troubleshooting.
• Modules are equipped with eight 0-10VDC outputs to control dimmable ballasts, eight 3-wire switch inputs to override the outputs, eight pilot light outputs to power switch indicator LEDs and two 0-10Vdc inputs for photocells
• Switch inputs compatible for direct connection to occupancy sensors.
• All inputs are fully configurable through the use of a system controller to work with a wide variety of input devices and control any combination of system relays and dimmers.

• Once configured, all module settings are stored locally and the module will continue to operate in fail-safe mode even if the system controller is removed from the system.

Used in conjunction with system enclosure and SYSC MLX controller to provide manual and automatic control of DALI or SIMPLY5 ballasts. Combine with 0-10V, relay and line voltage dimmer modules to create a complete lighting control solution for any application.

Module includes network controllers and power supplies for three DALI or SIMPLY5 networks (loops) of up to 64 devices each. Connected DALI/SIMPLY5 devices may be configured via the system controller for status monitoring and prioritized control by any Synergy~174; user interface, timeclock schedule or graphical workstation.

Used in conjunction with system enclosure and controller to provide manual and automatic on/off and line voltage dimming control of a wide variety of lighting loads. Combine with relay, 0-10V and DALI modules to create a complete lighting control solution for any application.

• Modules include six 20A line voltage dimmers with integral 15A or 20A circuit breakers and are available for 120V, 230V and 277V applications. Each dimmer is equipped with an air-gap relay and an architectural-grade toroidal filter.
• All digital design ensures smooth, dependable performance without field calibration. Unique combination of analog circuitry and digital signal processing techniques minimize the effects of poor power quality and prevent noticeable flicker and drift.
• Individual dimmer response curves are field configurable to accommodate most lamp and ballast types via the system controller. Once configured, all module settings are stored locally and the module will continue to operate in fail-safe mode even if the system controller is removed from the system.

The constant circuit breaker module is used with the Synergy enclosure to provide branch circuit protection for lighting loads. The constant breaker module can be used in conjunction with dimmer modules to provide either controlled or uncontrolled load outputs. Power modules are interchangeable within the enclosure.

• Four or six circuit breakers per module
• Main input power lug per module
• Sub-feed power lug per module

The LSA M1 RS485 network repeater provides a means of extending the Synergy~174; A4 digital control station network beyond 2000 feet, for linking network segments that contain two different cable types (SYA CABLEA4 or Beldon 3105A only), or for accommodating T-Taps or branches on the A4 control station network.

• Connects to the Synergy SYA CABLEA4 twisted pair networks via detachable terminal blocks.
• Low voltage power supply included.
• LEDs indicate network status.
• 3000V isolation between networks.
• Termination and biasing jumper selectable for each network.

Two-scene portable control console that offers simple, economical control for the Synergy Series dimmer cabinet in applications such as small stages, churches and presentation areas. Dual operation modes offer conventional two-scene preset or a "hold and fade" mode with a virtual second scene to double the effective number of control channels. Heavy-duty construction will hold up in school applications, and operation is simple enough for untrained personnel.

• Channels: 24, 48 or 72 linear sliders arranged in two scenes (X & Y) of 12, 34 or 36 respectively.
• Instant on "bump" button associated with each channel fader. IES square law control response.
• Crossfader: Split X and Y crossfader handles provide dipless crossfade between scenes.
• Grand Master: Proportionally masters the light output of all channels simultaneously.
• Blackout Switch: Instantly switches the light output of all channels to off. An integral LED indicates when the blackout function is activated.
• Hold and Fade Switch: Doubles the effective number of control channels. Permits the setting and "holding" of a virtual scene for all channels while the actual channel faders are used to set a second scene.
• Special Effects: Permits automatic "chasing" of control channels in user set order, with adjustable speed and level control.

Used to boost the capacity of an ISD, DSD, or SQIDC Series wall-box dimmer. Allows Synergy SYPMB 6D, ISD, or SQIDC dimmers to control Electronic Low Voltage ballasts or LED drivers. Also allows an ISD Series dimmer to control three-wire fluorescent dimming ballasts and SQIDC dimmers to control four-wire fluorescent dimming ballasts.

RDMI 2000 120: For Incandescent and Magnetic Low Voltage applications
RDMF 2000 120: For Mark X Powerline and Hi-Lume, 120V applications
RDMF 3000 277: For Mark X Powerline and Hi-Lume, 277V applications
RDMELV 1000 120: For Electronic Low Voltage ballasts and LED drivers
RDMBC 1000 120: For 4-wire 0-10V dimming ballasts, 120V and 277V applications

• Available for a wide variety of dimming load types. Models for use with line voltage loads include an integral RFI filter. All models are phase independent of the control device and equipped with a low-end trim adjustment.
• Installation: RDMI, RDMF and RDMELV may be surface or flush mounted using a 2-gang box (at least 3.5" deep) and 2-gang raised cover. The RDMBC may be surface or flush mounted using a 4" square outlet box.

• Works in conjunction with Synergy SYPM power modules
• One RRU is needed for each Synergy cabinet to be overridden
• Available to sense either 120VAC-277VAC normal power
• The output is triggered at 50VAC for any input voltage (120/208/277)
• SPDT low voltage dry contact outputs rated for 10 Amps
• UL 924 listed

Plenum rated network cable suitable for use with industrial EIA RS~8211;485 networks.

SYA CABLEA4: Fully compatible for use with Synergy~174; SQCS, SYRS and DEQ digital networks.

• Factory approved network cables with matching conductor color coding consistent with all factory wiring diagrams and installation instruction for trouble-free network installations.
• SYA CABLEA4: Includes all required power and communication conductors. For use with industrial EIA RS-485 networks plus two #16 AWG conductors for 24V station power.

The SYA Ethernet switch provides five 10/100Mbps plug and play shielded RJ-45 ports for Synergy SYSC MLX Controller applications. Each port is Auto-MDX compliant and can operate as an uplink port, eliminating the need for crossover cables. All ports automatically negotiate data rate, duplex and flow control. Built in broadcast storm control prevents excessive broadcasts from degrading network performance.

• Compact size, 10BASE-T/100 BASE-TX compliant.
• Auto-negotiated data rate, duplex and flow control.
• Panel and DIN-Rail mountable versions available.
• Powered from an unregulated DC power source (10-36Vdc) or from an AC power source (8-24Vac, 47-63Hz). Power is applied to the device using a quick disconnect terminal strip.
• Broadcast storm control, full or half duplex.
• Activity/link and data rate LEDs, industrial environment EMC and CE Marks.

• Indoor applications
• Through beam
• Easy mounting
• Acts as a switch input to a Synergy power module.

The SYA M1 ARCARC Arcnet-to-Arcnet network repeater provides a means of extending the Synergy~174; S2 panel network beyond 2000 feet, for linking network segments that contain two different cable types (SYA CABLES2 or Beldon 3105A only), or for connecting more than 32 SYSC MLX controllers to a single network.

• The SYA M1 ARCARC repeater enclosure may be desk or panel mounted.
• Connects to the Synergy twisted pair networks via detachable terminal blocks.
• Low voltage power supply included.
• Status LEDs indicate network status or reconfiguration.
• Minimizes jitter with precision delay line timing.
• Device is DC coupled and network termination is jumper selectable.

The Synergy~174; system SYA M1 ARCFST network link provides a means of linking one duplex fiber optic network segment with one EIA-485 twisted pair network segment for Synergy ARCNET~174; networks.

• Enclosure may be desk or panel mounted.
• Connects to Synergy twisted pair network segment via detachable terminal block.
• Connects to duplex fiber optic network segment via ST connectors.
• Low voltage power supply included.
• LEDs indicate network status and reconfiguration.
• Minimizes bit jitter with precision delay line timing.
• ElA-485 twisted pair port is DC coupled; network termination is jumper selected.
• Fiber optic port supports three different fiber sizes (shown in microns): 50/125, 62.5/125, or 100/140.

The SYA M1 ARCFST2 network hub provides a means of linking two duplex fiber optic network segments with a single ElA-485 twisted pair network segment for Synergy ARCNET~174; networks.

• Enclosure may be desk or panel mounted.
• Connects to Synergy twisted pair network segment via detachable terminal block.
• Connects to duplex fiber optic network segment via ST connectors.
• Low voltage power supply included.
• LEDs indicate network status and reconfiguration.
• Minimizes bit jitter with precision delay line timing.
• ElA-485 twisted pair port is DC coupled; network termination is jumper selected.
• Fiber optic port supports three different fiber sizes (shown in microns): 50/125, 62.5/125, or 100/140.

The SYA Router is a high-performance, microprocessor based ARCnet router designed to provide a simple, BACnet compatible bridge between the Synergy RS-485 ARCnet network and an Ethernet LAN.

• Native BACnet device
• Full 10 Base-T Ethernet compatibility
• Connects directly to Synergy ARCnet network
• Supports up to 100 Synergy Controllers
• Compact steel enclosure
• Minimizes jitter with precision delay line timing

The AL5/AL8 combines clean, fine lines with a unique design that complements any space. The completely luminous optical system provides a concave visual appearance while providing high fixture performance and even illumination.

Construction

Rugged, one-piece cold-rolled steel reflector assembly with embossed steel for increased structural integrity and strength. Polyester powder-paint after fabrication.

Hinged doorframe assembly retains optical assembly and easy access to electrical components. End plates include integral T-bar clips.

Optics

Luminous optical system consists of a unique blend of high performance transmittance diffuser coupled with a concave, clear, ribbed refractor for and unique multi-step appearance. To improve fixture performance and eliminate pixilation the diffuser uses a unique blend of high molecular weight polymer beads with unrelated refractive index.

Electrical

High performance fluorescent systems with your choice of lamp types and ballast types to tailor the light levels and energy saving to meet individual application needs. Highly efficient programmed-start or instant-start electronic ballasts, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified, sound rated A.

Luminaire is suitable for damp locations. AWM, TFM or THHN wire used throughout, rated for required temperatures.

Ballast disconnect provided where required to comply with U.S. and Canadian codes.

Installation

Lightweight and easy to install in any standard T-Bar system.

Construction

The relight assembly consists of four basic component parts that easily install into the host fixture.

End brackets are heavy-gauge powder-painted steel and are attached securely to the host fixture with included hardware. These brackets provide all of the support and attachment points for the light engine and trim assemblies. End bracket flanges have black finish to match reveals of most deep-cell parabolics.

The light engine serves as the reflector system and heat-sink and is finished in high-reflectance white powder paint. To reduce time and labor for installation, all electrical components are shipped installed and prewired on the light engine for simple electrical connection via the installed driver quick disconnect. A unitized trim assembly provides reflector and refractors for volumetric performance and architectural aesthetics. Molded and recyclable PETE (polyethylene) reflector is firmly attached to the universal bracket via hinge and latch assembly. Included in this assembly are two prismatic acrylic refractors with light-diffusing finish for even illumination and LED obscuration.

A steel splice box accessory is included with the kit for use when required by non-standard retrofit wiring conditions.

Optics

Volumetric illumination is delivered by creating an optimal mix of light to walls, partitions, vertical and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced, complementary luminous environment. Light distribution is carefully controlled at high angles, providing just enough luminous flux to create the volumetric effect.

Linear faceted reflector cavity softens and distributes light into the space while minimizing luminous contrast between the fixture and ceiling.

Regressed refractor system obscures and integrates individual LED images and uniformly washes the reflector cavity with light. Sloped end panels provide a smooth, luminous transition between fixture and ceiling while enhancing the perception of fixture depth.

Electrical

Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. RTLR is rated to deliver L80 performance for 50,000 hours.

eldoLED driver options deliver choice of dimming range and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI. Optional integrated nLight®controls make each luminaire addressable — allowing it to digitally communicate with other nLight-enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight-enabled control devices and the RTLR luminaires using standard Cat-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission.

Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting. Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

Driver disconnect provided where required to comply with US and Canadian codes.

Installation

Trim hinges from either side and latches securely with cam-action latches. LED access by hinging trim down to 90º, providing tool-less access to light engine. For tool-less access to driver, twist 1/4-turn latches and hinge light engine down. LED boards include plug-in connectors for easy replacement or servicing.

Suitable for use in host fixtures rated for static or many air-handling functions. (Consult factory for details on air-handling compatibility).

Construction

Universal end brackets are constructed of 20-gauge powder-painted steel and are secured to the host fixture with provided tek screws. End brackets are painted black or white to match existing parabolic or troffer door frame reveals. The LED light engine is 20-gauge powder painted steel and is wired to the supply voltage using a driver-disconnect plug system provided as standard. A steel wiring connection cover is provided for use if required.

The door frame and reflector assembly is vaulted cold-rolled steel with embossed facets and is painted after fabrication. Impact-modified, single clear acrylic diffuser provides excellent shielding and wide distribution.

Optics

Volumetric illumination is delivered by creating an optimal mix of light to walls, partitions, vertical and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced, complementary luminous environment. Linear faceted reflector cavity softens and distributes light into the space while minimizing luminous contrast between the fixture and ceiling. Sloped end plates provide a smooth, luminous transition between fixture and ceiling while enhancing the perception of fixture depth.

Electrical

Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 2VTL2R is rated to deliver L80 performance for 50,000 hours. eldoLED driver options deliver choice of dimming range and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI. Optional integrated nLight®controls make each luminaire addressable — allowing it to digitally communicate with other nLight-enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight-enabled control devices and the 2VTL2R luminaires using standard Cat-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission.

Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting. Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. Driver disconnect provided where required to comply with US and Canadian codes.

Installation

After existing fluorescent components are removed from housing, universal end brackets are fastened in place with tek screws. The LED light engine assembly mounts to the end brackets and hangs securely while the wiring connection is made using a driver-disconnect plug system provided as standard. The light engine then swings up into position and is secured in place with a captive screw at each end. The door frame is then inserted via a sliding hinge into the end bracket and secured in the closed position with a rotating cam latch. Light engine may be removed from fixture during service. LED boards include plug-in connectors for easy replacement or servicing. Suitable for damp location installations.

The Shadow Box Square surface-mount LED luminaire combines digital lighting and control technologies with an aesthetically-pleasing, uniform brightness. The combination of perforated perimeter and white center section provide a unique design element for commercial and institutional applications. The high-efficacy light engine delivers long life and excellent color, ensuring a lighting installation that is efficient and sustainable.

Construction

Housing formed from cold-rolled steel. Housing is painted after fabrication for superior finish.

Smooth hemmed sides and smooth inward-formed end flanges, for easy handling.

Standard extruded aluminum door frame has superior structural integrity with premium appearance and mitered corners. Door frame is painted after fabrication, standard. Powder-painted rotary cam latches provide easy, secure door closure. Integral T-bar clips are standard. Acrylic shielding material is 100% UV stabilized.

Optics

Stylish open matte white surrounded by perforated patterned trim creates a unique lighted appearance and adds visual interest to the space.

Electrical

Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).

nLight® embedded controls make each luminaire addressable - allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight enabled control devices and the AL luminaires using standard Cat-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission.

Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI.

Driver disconnect provided where required to comply with US and Canadian codes.

Installation

Surface mount. Drivers and internal components are accessible from floor. Suitable for damp location. Maintenance: LED boards include plug-in connectors for easy replacement or servicing.

The I-BEAM IBL LED luminaire represents the best of our LED technologies and our most popular high bay product. The result is a high-performance, quality, configurable LED luminaire that is an ideal one-for-one replacement of conventional high bay systems such as HID and fluorescent. Applications include warehousing, light manufacturing and other large indoor spaces with mounting heights up to 60' and ambient temperatures up to 131°F (55°C).

Increase your R.O.I. with controls!
The IBL LED is available with integrated controls and sensor options (occupancy, photo & dimming) to reduce energy costs and help extend the life of the fixture.

Optional XPoint™ Wireless controls technology creates a mesh network that communicates between fixtures, sensors and wall stations facility-wide. This option provides superior lighting management capabilities including granular control that can light zones differently depending on the time of day, season and special event.

Large indoor spaces with mounting heights up to 60' and ambient temperatures up to 131°F (55°C).

Installation
Suitable for suspension by chain, cable, surface-mounting bracket, hook monopoint or single (pendant) monopoint. Surface mounting is not recommended without optional surface mounting bracket. To maintain high ambient listing, fixture should be mounted at a minimum plenum height of 24".

Warranty
Five-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Affordable and configurable warehouse lighting
The I-BEAM® IBH LED luminaire gives even budget-conscious customers a very reliable LED solution. In addition to its low initial cost, the fixture saves up to 60% in energy costs over HID and also costs less to operate than popular fluorescent products - not to mention the maintenance savings! When paired with occupancy sensors, dimming and intuitive controls, you save even more energy and extend the life of the fixture.

Increase your R.O.I. with controls!
The IBH LED is available with integrated controls and sensor options (occupancy, photo & dimming) to reduce energy costs and help extend the life of the fixture.

Optional XPoint™ Wireless controls technology creates a mesh network that communicates between fixtures, sensors and wall stations facility-wide. This option provides superior lighting management capabilities including granular control that can light zones differently depending on the time of day, season and special event.

With a diffuse lens to control glare, this fixture is suitable for mounting heights from 10’ to 40’. It is ideal in controlled environments such as warehousing, gymnasiums and light industrial spaces.

Construction

Extruded housing and heat sink made from 6063-T5 aluminum allows for superior thermal management to reduce both LED and driver temperatures. Clear anodized finish is standard to resist scratching, corrosion and provide refined appearance. The joiners and modules are made from die-cast, zinc alloy which reduces electro-magnetic interference (EMI) and offers improved thermals over alternative materials. Joiners and modules are painted with baked enamel; five-stage iron phosphate pre-treatment ensures superior adhesion.

Optics

Proprietary lensing engineered using precision-molded acrylic. The lenses work together with die-formed reflectors utilizing highly reflective WhiteOptics™ coating to improve light on task. Optical patterns range from aisle-specific to open area distributions. Pixelation is eliminated through the use of lenticular ribs on each lens in combination with semi-diffuse overlay inside the optical chamber.

Electrical

Thermally protected, high-efficiency driver(s) standard with 0-10V dimming down to 10%. Each 4’ or 8’ rail contains one driver. LED light engine features OSRAM Duris E5. 25W LEDs which are connected using mating connectors to eliminate wiring inside optical chamber.

Other

The T Series LED surface-mount troffer combines digital lighting and controls technologies with a high-performance optical system to deliver general ambient lighting.

Ideal for commercial applications including offices, schools and hospitals. The high-efficacy light engine delivers long life and excellent color, ensuring a lighting installation that is efficient and sustainable.

Construction

Designed exclusively for use with LED Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Powder painted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product.

Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel.

Optics

Standard pattern #19 lens, 0.156" thick with highly transmissive overlay, is standard for superior brightness control. Overlay is 0.040" thick. Other lenses are available.

Electrical

Long-life LEDs, coupled with high-efficiency drivers, provide superior level and quality of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).

Standard nLight® embedded controls continuously monitor system performance, allow for constant lumen management/compensation function, facilitate simple "plug-and-play" network and controls upgrading via CAT5 cable. LED driver delivers full-range dimming from 0-10V control signal. Ballast disconnect is provided where required to comply with US and Canadian codes.

Installation

Surface mount. Drivers and internal components are accessible from floor. LED boards include plug-in connectors for easy replacement or servicing. Suitable for damp location.

Beauty and Performance

The SLOT LED family combines modern aesthetic elegance with unequalled performance and energy efficiency, design flexibility, seamless controls integration, and the service and support of an industry leader. Three widths, recessed, pendant, surface, and wall. In short, everything you need to light your imagination.

Performance - best-in-class efficacy, delivered lumens and CRI.

Beautiful Dimming - Available constant current LED drivers from eldoLED deliver smooth, flicker free dimming to 0.1%.

nLight® Intelligent Controls - Intuitive and complete solution that eliminates compatibility issues and reduces deployment costs.

Mark 360° Total System Integration - Acuity Brands manufactures both the luminaire and the controls. This ensures unparalleled color consistency, beautiful dimming, maximum energy efficiency complete with integrated controls- all supported and warranted by Acuity Brands.

A+ Certified Systems – Pre-qualified configurations of Slot Family luminaires can be part of an A+ Certified lighting system - your assurance of compatible and consistent performance.

On The Mark – Our most popular products can be tailored to project needs and shipped in 10 days. -

FEATURES:

• Direct illumination with efficacy up to 69 lumens per watt
• Low-profile, 4-3/8” installed depth
• Smooth, flicker-free dimming to 1%, standard; dimming to 0.1%, optional
• nLight® enabled controls
• Individual units, 2 – 8 ft. long; unique 2’x2’ configuration is ideal creative design element
• Continuous runs in 1” increments, standard; 1/4” increments for custom orders
• Color temperatures of 3000K, 3500K, 4000K
• 80 CRI, standard; 90 CRI, optional
• Nominal 2" wide housing fabricated from heavy-gauge extruded aluminum
• Snap-in, extruded, clear frosted acrylic lens (flush or regressed)
• Universal mounting detail for sheetrock or various tile grid ceilings

Beauty and Performance

The SLOT LED family combines modern aesthetic elegance with unequalled performance and energy efficiency, design flexibility, seamless controls integration, and the service and support of an industry leader. Three widths, recessed, pendant, surface, and wall. In short, everything you need to light your imagination.

Performance - best-in-class efficacy, delivered lumens and CRI.

Beautiful Dimming - Available constant current LED drivers from eldoLED deliver smooth, flicker free dimming to 0.1%.

nLight® Intelligent Controls - Intuitive and complete solution that eliminates compatibility issues and reduces deployment costs.

Mark 360° Total System Integration - Acuity Brands manufactures both the luminaire and the controls. This ensures unparalleled color consistency, beautiful dimming, maximum energy efficiency complete with integrated controls- all supported and warranted by Acuity Brands.

A+ Certified Systems – Pre-qualified configurations of Slot Family luminaires can be part of an A+ Certified lighting system - your assurance of compatible and consistent performance.

On The Mark – Our most popular products can be tailored to project needs and shipped in 10 days.

FEATURES:

• Direct illumination with efficacy up to 95 lumens per watt
• Low-profile, 4-3/8” installed depth
• Smooth, flicker-free dimming to 1%, standard; dimming to 0.1%, optional
• Downlight modules, optional
• nLight® enabled controls
• Individual units, 2 – 8 ft. long
• Continuous runs in 1” increments, standard; 1/4” increments for custom orders
• Color temperatures of 3000K, 3500K, 4000K
• 80 CRI, standard; 90 CRI, optional
• Nominal 4" wide housing fabricated from heavy-gauge extruded aluminum
• Snap-in, extruded, clear frosted acrylic lens (flush or regressed)
• Universal mounting detail for sheetrock or various tile grid ceilings

Beauty and Performance

The SLOT LED family combines modern aesthetic elegance with unequalled performance and energy efficiency, design flexibility, seamless controls integration, and the service and support of an industry leader. Three widths, recessed, pendant, surface, and wall. In short, everything you need to light your imagination.

Performance - best-in-class efficacy, delivered lumens and CRI.

Beautiful Dimming - Available constant current LED drivers from eldoLED deliver smooth, flicker free dimming to 0.1%.

nLight® Intelligent Controls - Intuitive and complete solution that eliminates compatibility issues and reduces deployment costs.

Mark 360° Total System Integration - Acuity Brands manufactures both the luminaire and the controls. This ensures unparalleled color consistency, beautiful dimming, maximum energy efficiency complete with integrated controls- all supported and warranted by Acuity Brands.

A+ Certified Systems – Pre-qualified configurations of Slot Family luminaires can be part of an A+ Certified lighting system - your assurance of compatible and consistent performance.

On The Mark – Our most popular products can be tailored to project needs and shipped in 10 days.

FEATURES:

• Direct illumination with efficacy up to 118 lumens per watt
• Low-profile, 4-3/8” installed depth
• Smooth, flicker-free dimming to 1%, standard; dimming to 0.1%, optional
• Downlight modules, optional
• nLight® enabled controls
• Individual units, 2 – 8 ft. long
• Continuous runs in 1” increments, standard; 1/4” increments for custom orders
• Color temperatures of 3000K, 3500K, 4000K
• 80 CRI, standard; 90 CRI, optional
• Nominal 6" wide housing fabricated from heavy-gauge extruded aluminum
• Snap-in, extruded, clear frosted acrylic lens (flush or regressed)
• Universal mounting detail for sheetrock or various tile grid ceilings

A decorative accent fixture, Fin has a clean, geometric form that complements any environment and gives it timeless appeal. Versatile and ornamental, it is perfect for making an aesthetic statement, creating intriguing patterns of light or enhancing other design elements.

• Housing and internal components fabricated from 20-gauge, cold-rolled steel
• Available in lengths from 2’ to 8’; acrylic fin depths of 2”, 3” or 4” below fixture door
• LED
• Choice of clear sides with frosted edges or frosted sides with frosted edges
• Horizontal or vertical mounting

Like a thin and delicate piece of fabric, Veil softens, warms and enhances light. A flexible, translucent PVC membrane provides the shielding that gently scatters light to give Veil its superior diffusing qualities. The almost sky-like light warms the appearance of interior environments, and with its wide range of standard and custom sizes, Veil is able to provide soft volumetric illumination for almost any room.

• Nominal 1~8217;x4~8217;, 2~8217;x2~8217;, 2~8217;x4~8217;, 4~8217;x4~8217;, or 5~8217;x5~8217; housing fabricated from 20-gauge, cold-rolled steel
• Flexible, translucent white PVC membrane with clear overlay membrane assembled to extruded aluminum door frame
• T5, T5HO, T8 and BX lamp choices; 1 to 8 lamps, depending on fixture size and depth
• Designed to accommodate 9/16~8221; slot grid ceilings; 4~8217;x4~8217; and 5~8217;x5~8217; units require support to structure

High efficiency, shallow design and a patent-pending install-from-below option are among the many practical benefits offered by Nol LED. A center reveal, decorative accents and multiple lensing options all contribute to its aesthetic appeal. Nol LED is an ultra shallow luminaire that will fit in virtually any plenum space.

• 20-gauge, cold-rolled steel housing; 1’x4’, 2’x2’ or 2’x4’
• Fixture depths as shallow as 1¾”
• Contoured acrylic center lens—square or round profile—in clear, clear with overlay, clear frost or white frost
• Efficiency ratings as high as 88%
• LED
• Install-from-below option
• Quick-release ballast/lamp compartment

With a sleek, low-profile form, Vellum valiantly delivers
on the promise of LED lighting by combining simple, yet sophisticated, modernity with practical efficiency to provide extraordinary illumination. This award winning indirect/direct luminaire yields an impressive wide batwing distribution allowing for greater spacing and more uniform ceiling illuminance.

Available with rounded or squared end caps,4ft. and 8ft. sections, and measuring a mere 1” in height, Vellum luminaires feature Softshine® optics that provide comfortable, glare-free illumination and remote, in-ceiling eldoLED® drivers that provide smooth, flicker-free digital dimming to dark (0.1% low end).

Soft, bright illumination is created with the 2x2 Vellum recessed luminaire. Designed with a slight 1” reveal, the square or rounded articulated detail creates visual interest while staying true to its minimalist form. Like all of the Vellum products, this luminaire delivers glare-free, uniform illumination without visible pixilation often found in other edge-lit products.

With an ultra-thin profile coming in at just 2” when used with the remote driver option, the recessed Vellum is ideal for shallow plenum applications.

Designed to be kind to the eyes with advanced Softshine® optics that diffuse and evenly distribute comfortable light, Peerless Mino 1x1 Recessed is also highly energy efficient producing up to 96 lm/W.

As Peerless Mino is viewed from different angles, subtle geometric abstractions around the perimeter of the lens surface shift in appearance adding a dramatic touch of style and sophistication.

Peerless Mino 1x1 Recessed installs into grid ceilings and is also well-suited for use in hard-surface ceilings and walls. It can also be ordered as nLight-enabled to provide controls connectivity, energy-saving digital lumen management or both.

Designed to be kind to the eyes with advanced Softshine® optics that diffuse and evenly distribute comfortable light, Peerless Mino 1x4 Recessed is also highly energy efficient producing up to 100 lm/W.

As Peerless Mino is viewed from different angles, subtle geometric abstractions around the perimeter of the lens surface shift in appearance adding a dramatic touch of style and sophistication.

Peerless Mino 1x4 Recessed installs into grid ceilings and is also well-suited for use in hard-surface ceilings and walls. It can also be ordered as nLight-enabled to provide controls connectivity, energy-saving digital lumen management or both.

Designed to be kind to the eyes with advanced Softshine® optics that diffuse and evenly distribute comfortable light, Peerless Mino 2x2 Recessed is also highly energy efficient producing up to 108 lm/W.

As Peerless Mino is viewed from different angles, subtle geometric abstractions around the perimeter of the lens surface shift in appearance adding a dramatic touch of style and sophistication.

Peerless Mino 2x2 Recessed installs seamlessly into grid ceilings and is also well-suited for use in hard-surface ceilings and walls. It can also be ordered as nLight-enabled to provide controls connectivity, energy-saving digital lumen management or both.

For clutter-free ceilings, Round 2 Wall Asymmetric Indirect is the answer. Hallways, lobbies, reception areas, waiting rooms and individual offices all can be well-illuminated from this ADA-compliant, wall-mounted luminaire.

Round 2 features an innovative, modular LED light engine that delivers greater than L80 performance for 50,000 hours or 12-15 years of normal use. Available in two lumen packages and three color temperature options, Round 2 emits remarkably color-consistent light.

Round 2 Wall Asymmetric Indirect can be specified with digital lumen management to deliver constant lumen output, extend LED longevity and save roughly 10% in energy use over Round 2's lifetime.

For clutter-free ceilings, Round 4 Wall Asymmetric Indirect is the answer. Hallways, lobbies, reception areas, waiting rooms and individual offices all can be well-illuminated from this wall-mounted luminaire.

Round 4 Wall Asymmetric Indirect can be specified with digital lumen management to deliver constant lumen output, extend LED longevity and save roughly 10% in energy use over Round's lifetime.

Round 4 features eldoLED® drivers that dim to 1% with no flicker as part of a modular light engine that delivers 50,000 hours (12-15 years) of illumination to L80.

Round 4 Wall Direct is a great wall-mounted luminaire for hallways, lobbies, reception areas, waiting rooms and individual offices.

Round 4 Wall Direct can be specified with digital lumen management to deliver constant lumen output, extend LED longevity and save roughly 10% in energy use over Round's lifetime.

Round 4 features eldoLED® drivers that dim to 1% with no flicker as part of a modular light engine that delivers 50,000 hours (12-15 years) of illumination to L80.

Direct attention to signs, menu boards, paintings, book shelves and other vertical features with Round 4 Wall-Wash.

Round 4 Wall-Wash can be specified as nLight®-enabled to provide network controls connectivity, energy-saving digital lumen management or both. Lumen management delivers constant lumen output, extends LED longevity and saves roughly 10% in energy use over Round's lifetime.

Round 4 features eldoLED® drivers that dim to 1% with no flicker as part of a modular light engine that delivers 50,000 hours (12-15 years) of illumination to L80.

For clutter-free ceilings, Square Wall Asymmetric Indirect is the answer. Hallways, lobbies, reception areas, waiting rooms and individual offices all can be well illuminated from this wall-mounted and ADA-compliant luminaire.

Square Wall Asymmetric Indirect can be specified with digital lumen management to deliver constant lumen output, extend LED longevity and save roughly 10% in energy use over Square's lifetime.

Square luminaires feature glare-free, Softshine® comfort optics and eldoLED® drivers that provide smooth, flicker-free digital dimming to black (0.1% low end).

Square Wall Direct is an ideal wall-mounted and ADA-compliant luminaire for hallways, lobbies, reception areas, waiting rooms and individual offices.

Square Wall Direct can be specified with digital lumen management to deliver constant lumen output, extend LED longevity and save roughly 10% in energy use over Square's lifetime.

Square luminaires feature glare-free, Softshine® comfort optics and eldoLED® drivers that provide smooth, flicker-free digital dimming to black (0.1% low end).

Direct attention to signs, menu boards, paintings, book shelves and other vertical features with Square Wall-Wash (suspended and surface).

Square Wall-Wash can be specified as nLight®-enabled to provide network controls connectivity, digital lumen management or both. Lumen management delivers constant lumen output, extends LED longevity and saves roughly 10% in energy use over Square's lifetime.

Square luminaires feature glare-free, Softshine® comfort optics and eldoLED® drivers that provide smooth, flicker-free digital dimming to black (0.1% low end).

Staple Wall LED produces quality illumination that promotes workplace productivity and helps improve classroom learning.

Featuring Softshine®-engineered comfort optics Staple Wall LED delivers on the Peerless mantra of Lighting for People by emitting diffuse, uniform and glare-free illumination.

Staple Wall LED features eldoLED® drivers that fully dim to black with no flicker as part of a modular light engine that delivers 50,000 hours (12-15 years) of illumination to L80.