Round tapered steel sports lighting pole with 40- to 80-foot mounting heights. 60-foot and longer are two section poles.
Shaft: Pole shaft sections are high-strength low-alloy steel conforming to ASTM A572 Grade 65 or ASTM A595 Grade A. Cross-section is round or 16-sided with a 4" bend radius. Each pole is a constant tapered hollow steel section up to 55 feet in length with a minimum 1-1/2 times diameter slip joint as standard for two section pole. Shaft plate is single thickness without laminations.
Anchor base: Fabricated from hot-rolled carbon steel plate that conforms to ASTM A36 or ASTM A572 Grade 42. Base plate and shaft are circumferentially welded top and bottom.
Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.
Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others).
Hardware: Fasteners are high-strength galvanized or zinc-plated or stainless steel.
Hand hole: Oval shaped, reinforced hand-hole rim having a nominal dimension of 4" x 6.5". Steel cover with attachment screws included. Hand hole is located 18" above base.
Top cap: Removable top cap provided with all drill-mount poles.
Finish: Must specify finish.
Check out POLESCENTRAL for additional resources and solutions.