RELOC® modular wiring solutions for lighting control and power distribution systems provide numerous advantages to contractors, building owners and facility managers. The system's pre-manufactured plug and play components quickly snap together, significantly reducing time and labor costs at installation. This equates to a lower total job cost and reduced construction cycle time.

Secondly, the system is completely flexible, so that occupants can reconfigure the modular wiring systems in office, warehouse, retail and countless other applications.  The sustainable, reusable and re-locatable nature of the system makes adds and changes fast and easy.

Additionally, RELOC® wiring offers tax savings when qualifying as personal property instead of real property. RELOC®’s industry-leading assortment of Integrated Controls Wiring products take the RELOC® value proposition to a whole new level.

INTEGRATED CONTROLS WIRING

Traditional wiring for intelligent lighting required separate runs for Class I and Class II wiring; whereas, RELOC provides Digital Addressable Lighting Interface (DALI) wiring or 0-10 v dimming wiring and power within ONE simple, pluggable wiring system.  RELOC modular wiring systems are engineered to work seamlessly with all intelligent lighting applications.  This value is further enhanced when paired with Acuity Brands light fixtures prewired with the RELOC-Ready Luminaire (RRL) option.

RELOC’s new Modular Power Packs allow easy integration of controls systems from Acuity Controls for fixture or zone-level control.  See OCM, RCM, and RCMKO products for more details.

RECESSED CEILING LIGHTING

RELOC offers two unique systems for recessed ceiling applications. QuickFlex® is used for applications requiring up to two circuits and System 820 is used for applications that require three circuits. Both systems are faster and easier to install than MC Cable® or other modular wiring systems. With only three basic components, the system components snap together in a fraction of the time it takes to wire a fixture with MC Cable. There is no need for tools. Due to faster installation, labor costs are dramatically reduced, cutting down the total job cost.

Both Systems are ideal for wiring lay-in troffers, parabolics, downlights, indirect fixtures and emergency lighting circuitry in office buildings, schools and retail stores.

RELOC offers two unique systems for recessed ceiling applications. QuickFlex® for two circuits and the 820 system for three circuits. 

- Only three basic components

- No tools needed

- Switch drops available

- Much faster installation than MC Cable results in dramatic reduction in total job cost

Quick-Flex (4 conductor max)

System 820 (5 conductor max, controls integrated options)

OPEN CEILING LIGHTING

Traditional hardwiring requires three or more passes to install conduit, pull wire and hang fixtures. OnePass snaps together in a fraction of the time than other wiring methods.

OnePass is ideal for installing HID and fluorescent fixtures in manufacturing facilities, warehouses, retail facilities and any other open-ceiling fixture applications. With faster installation, labor costs are dramatically reduced, cutting down the total job cost.

RAISED FLOOR

Raised Floors are ideal for power and data distribution in high rise buildings, data and call centers, casinos, green buildings and all types of government facilities. The wiring is right below the work stations and can be easily relocated, reconfigured and or scaled based on changing needs of the occupants. The system consists of RELOC Mainrun Cables with Primary Distribution Boxes, RELOC Cables and Floor Modules.

 RELOC's Raised Floor System products make the installation of Power wiring fast, easy and economical, offering:
    - Lowest total installment costs
    - Lowest cost of ownership
    - On time and on budget
    - Safety and reliability
    - Sustainability

HEALTHCARE

RELOC products with HCF option are ideal for Lighting and Power wiring in health care facilities such as:

- Hospitals

- Nursing Homes

- Limited Care Facilities

- Clinics

- Medical and Dental Offices

- Ambulatory Care Centers

RELOC products with HCF option are constructed with lightweight green Aluminum Interlocked armor offering an equipment ground and a full size bare Aluminum grounding / bonding conductor (redundant ground) as required by NEC article 517 and 517.12.

All branch circuit wiring in above areas must be compliant with noted NEC articles. RELOC HCF products cannot be used for circuits serving the Emergency Systems, Life safety and critical care equipment. RELOC products with HCF option are ideal for Lighting and Power wiring in health care facilities.

Product is constructed with lightweight green Aluminum Armor offering an equipment ground and a full size bare Aluminum grounding / bonding conductor (redundant ground) as required by NEC article 517 and 517.12.

RETAIL SOLUTIONS

RELOC Wiring Solutions now offers a complete Plug-n-play wiring solution for retail environments, from the breaker panel to the power receptacle, including a full line of power poles and Multi-outlet assemblies.

Racking Solutions
Delivering power safely from busways to warehouse-style racks and seasonal displays is a challenge during initial installation and during resets. RELOC multi-outlet assemblies and cables are flexible, minimizing installation time and making it easy to route power where it is needed.

Lighting Solutions
Delivering power safely from busways to warehouse-style racks and seasonal displays is a challenge during initial installation and during resets. RELOC multi-outlet assemblies and cables are flexible, minimizing installation time and making it easy to route power where it is needed.

Front-End Solutions
Pre-wired Power Pole with lighted sign. Complex combinations of receptacles, switches, telecom ports, support brackets for cameras and signage are included in the power pole to make installation simple and clean.

Gondola & Kiosk Solutions
To safely bring power, telecommunications, and video wiring to stand-alone gondola racks, use RELOC Power Poles and wiring to reach the gondolas. RELOC Power Channels give you the ability to safely and aesthetically deliver power, data, and video outlets to the entire gondola.

Bakery & Refrigeration
Ovens that require high-current power supplies can be quickly wired with the large conductors that make up the RELOC Main Run Cable, Optional junction boxes can be pre-wired to quickly and safely bring the power close to the equipment.
RELOC can also provide power and signal wiring to refrigerator and freezer units. It's easy to wire power to case lighting and fans, as well as low-voltage signals to thermostats.

Copy Center/Photo Lab
Copy Centers and Photo Labs require delivery of high voltage and high current. With RELOC Power Poles, Power Bases, and Pre-wired Multi-Outlet Assemblies, it's a snap.

TV / Electronic Solutions
Reliably delivering High-Definition video signals throughout the display racking, requires high-quality amplification and cable protection while allowing easy reconfiguration. RELOC offers aesthetically pleasing Audio/Video Power Channels to easily route all functions to the TV's, video games, and other electronic merchandise.

Back to the Panel Solutions
RELOC Wiring Solutions offers a variety of products to extend your savings back to the Panel. At the heart of this offering is the RELOC Mainrun Cable (RMC) products. RMC helps get the job done in less than one-third the time compared to traditional hardwiring methods.

CLASS I/CLASS II SYSTEM

RELOC’s patent-pending Class I/Class II system features a unique construction that allows it to carry line voltage and low voltage in a single conduit for unprecedented efficiency in 0-10 volt and DALI dimming applications wiring.  Available in RELOC 820 and OnePass systems.

Key Features:    
- Eliminates need for separate low voltage wiring    
- UL listed and complies with the National Electric Code    
- Use with RELOC-Ready Luminaire option for maximum labor savings

MODULAR POWER PACKS

Integrate Acuity Controls products into the RELOC modular wiring system easily with Modular Power Packs.

Key Features:    
- Zone - or fixture-level control
- Error-free controls wiring
- Increases labor savings value proposition

CAT5, LOW-VOLTAGE CABLE, AND PREWIRED LUMINAIRES

RELOC offers options that make integrated controls wiring simple.  You can even order your intelligent lighting prewired with RELOC.

Key Features:
- Order prewired with RELOC-Ready Luminaire option for greatest labor savings
- CAT5e or low-voltage wiring to pre-terminated and tested to specified lengts
- CAT5e & low-voltage wiring can be factory attached to RELOC OnePass and 820 systems
- Coupler kits to easily connect to other devices such as occupancy sensors

SYSTEM 820

The Reloc 820 system provides a full-featured 3-phase wiring solution for lighting and power applications. The small connector heads make it ideal for use in tight quarters and small raceways. With the full family of 820 products, any branch circuit can be quickly and easily wired.

Key Features:
- 5 conductor max
- UL listed autoground for recessed fixtures
- 120, 277 and 347 voltages
- 12AWG Wire
- Use with normal, emergency, nightlight fixtures, emergency units and convenience power
- Switching
- Health Care option available
- NYC Certified
- Custom cable colors available

QUICK-FLEX

Quick-Flex® recessed-ceiling wiring is faster and easier to install than MC Cable® or other modular wiring systems.

Key Features:
- 4 conductor max
- UL listed autoground
- 120, 277 and 347 voltages
- 12AWG Wire
- Use with normal, emergency, nightlight fixtures and emergency

ONEPASS

OnePass® open-ceiling wiring simplifies the installation of HID and fluorescent fixtures. OnePass Standard Features Traditional hardwiring requires three or more passes to install conduit, pull wire and hang fixtures.

Key Features:
- Exclusive OCS thumb slide phase selector
- 5 conductor max
- 2 Neutrals available
- 120, 240, 277,347 & 480 voltages
- 12AWG & 10AWG 20A option
- Use with normal, emergency, nightlight fixtures and emergency units
- Custom cable colors available
- NYC Certified

MAINRUN CABLES

RELOC Wiring Solutions offers a variety of product components to extend your savings back to the panel. At the heart of this offering is the RELOC Mainrun Cable product. It significantly improves onsite productivity, creates construction consistency and enhances product safety. RMC helps get the job done in less than one-third the time compared to traditional wiring methods. For maximum savings, the RMC can be pre-wired to a Primary Distribution Box with RELOC starters.

Key Features:    
- RMC & DBP as one assembly complete with system ports
- Suitable for environmental air handling spaces
- All conductors are type THHN rated for 90C
- 12 RELOC ports available for maximum flexibility
- DBP and RMC labeled for easy conductor identification
- Optional pull tape to add conductors

RETAIL PRODUCTS AND POWER POLES

Retail projects demand wiring solutions that minimize installation time and easily adapt to store design changes that occur during initial store construction and in the future. Due to rising labor costs and shortages of qualified electricians, traditional wiring methods no longer measure up. 

With a recently expanded product line, RELOC now offers a comprehensive, plug-n-play wiring solution from the breaker panel out to the lighting fixture and power receptacle. RELOC also offers an extensive Power Pole line offers an economical means to bring power and data cables down from the ceiling to utilization equipment.

Key Features:
Power Poles:
- Aluminum construction
- Modular design with 3 channel max 
- Field-adjustable extension arm
- Pass-through & wired versions
- Duplex & single receptacles
- Power & data
- High density power
Other Retail Products:
- Power channel for pegboards, uprights, & gondolas
- Normal and isolated ground power
- Multi-Outlet Assembly max 8-gang boxes
- Receptacle strips max 12 receptacles

RAISED FLOOR

Raised Floors are ideal for power and data distribution in high rise buildings, data and call centers, casinos, green buildings and all types of government facilities. The wiring is right below the work stations and can be easily relocated, reconfigured and or scaled based on changing needs of the occupants. The system consists of RELOC Mainrun Cables with Primary Distribution Boxes, RELOC Cables and Floor Modules.

RELOC's Raised Floor System products make the installation of Power wiring fast, easy and economical, offering:
- Lowest total installment costs
- Lowest cost of ownership
- On time and on budget
- Safety and reliability
- Sustainability

BROCHURES

US LIGHT QUICK PROGRAM

'LightQuick' is our commitment to service, promising 2-day shipment on over 100,000 stock and made-to-order products from your local Regional Manufacturing and Distribution Center (RMDC). It doesn't stop there. At Acuity Brands, we believe that service and support are just as crucial as on-time delivery of products. At each RMDC, dedicated, customer care teams will work with your local agent to tailor our comprehensive manufacturing, stock and logistic capabilities to meet your specific opportunity needs.  To see which RELOC items are available via LightQuick from your local RMDC check here:

INSTALLATION VIDEOS

INSTALLATION INSTRUCTIONS

GUIDELINE SPECIFICATIONS

CALCULATORS

Easy Voltage Drop Calculator

CODES AND STANDARDS

Reloc complies with Article 604 of the National Electrical Code (NEC)

Reloc is manufactured to UL standard 183

HISTORY

Those who have made the connection with RELOC® Wiring Systems have saved $50 million during our 30 years in business. How? RELOC wiring offers the lowest total installed cost of any wiring method. RELOC components snap together quickly and easily, requiring less time on the job, which saves the owner money and gets the contractor to the next job quickly. If you haven’t made the connection, don’t miss another chance to put time in your schedule and money in your pocket.

CONTACT US

Corporate Headquarters 
1170 Peachtree Street, NE Suite 2300 
Atlanta, GA 30309-7676 
1-800-922-9641 

Acuity Brands Lighting 
One Lithonia Way 
Conyers, GA 30012 
770-922-9000

Interested in purchasing product?
How to Buy

CUSTOMER CONTACT INFORMATION

We respect your privacy and will not sell your information to outside parties.
Select the two expressions equal "6"?